which clutch should i get?

[nolaEp3]

Hello, I was wondering if anyone recommended a particular clutch. I have an 03 si which the greddy turbo kit running about 9psi. I believe the clutch that is in there now is an act but not sure of the specifics. Also, i have an act streetlite flywheel. Any input or experiences would be helpful.

Thanks.

[Dreadknotz1025]

Hello, I was wondering if anyone recommended a particular clutch. I have an 03 si which the greddy turbo kit running about 9psi. I believe the clutch that is in there now is an act but not sure of the specifics. Also, i have an act streetlite flywheel. Any input or experiences would be helpful.

Thanks.

Do u have an idea as to how much power your making? HP or TRQ specs may assist in a recommendation.

I believe based on research that the RSX-S-Clutchmasters Stage 2 6puck will do u just fine.

[Her-Name's-Ally]

I've heard good things about the stage 2 competition clutch depending on how much power you're getting you may want to go higher stg 3 or 4.

[Eddie Murphy]

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10625069_10204245144941810_7159129104549853895_n.j pg?oh=708820d4df6e7dc30b7116a798b79d94&oe=552D772F&__gda__=1429128347_e0363a415d2a046728ad1f0ab73a07c 3

[Spazhead]

I need a clutch as well for my 03. Stock engine. But would like to put something better than stock clutch back in. Anymore more suggestion would be appreciated.

Thanks
spazhead

[Dreadknotz1025]

RSX type s OEM Clutch & lighter Aftermarket Flywheel. Check out Ebay for a combo. Just kno that if u choose to go RSX-sclutch , u will need the RSX-s flywheel.

I did this combo from ebay, with a 11lb flywheel when my 02 ep3 stock went out at 175,000 km. Now i am at 200,000+ km. By far better clutch package, great for downshifting, rev matching and no issues getting into gears at redline.

Thought i needed to change my Slave Cylinder and CMC, but after the clutch change am sold on the RSX-s package.

[Eddie Murphy]

For your turbo I would recommend an Exedy Stage 2 OR an Exedy Hyper Single and the Copm 11 lb flywheel... As for your stock, looking for something a bit better than OE replacement get the combo I posted a pic of above... The Exedy Stage 1 Clutch 08806 & Comp 11lb flywheel 2-800-ST, I use this with my NA K24a2 and love it. It's got plenty of holding power and shifts great with some nice grab and a slightly stiffer pedal feel.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10625069_10204245144941810_7159129104549853895_n.j pg?oh=708820d4df6e7dc30b7116a798b79d94&oe=552D772F&__gda__=1429128347_e0363a415d2a046728ad1f0ab73a07c 3

[Eddie Murphy]

The MFactory clutch/fly looks very interesting. If I boost this might be the clutch I get.


MF-TRS-08K20S (http://www.teammfactory.com/racing-clutch_362)

Honda K-Series

~400whp

$639.95




Hyper Series - 6-Puck Carbon Metallic Sprung Racing Clutch + Chromoly-Nitride Flywheel (http://www.teammfactory.com/racing-clutch)

http://www.teammfactory.com/images/catalog/racingclutch_tmb.jpg

[Eddie Murphy]

BEWARE where you buy your clutch from. Buy from an authorized dealer/forum vendor. Many eBay sellers will switch out the throw out bearing with a cheap knock off part. Make sure you get a Japanese made bearing like is supposed to be when you get Exedy clutches. That goes for any bearings you may need, get Japanese bearings like OEM or Koyo.

[jimmyjames]

competition clutch.
If you're going to put the money down though, you may as well go for the stage 4 , 6 puck, sprung