PDA

View Full Version : Rear Camber Issue



El Mocha King
04-13-2015, 09:16 AM
Hello all, my rear camber is off and caused my tires to wear out prematurely. I've been doing some research and it seems like the SPC kit is the way to go. I also found the DIY and it seems pretty easy to do myself. Iím wondering if there are any other kits out there that are as good as or better than the SPC, where is a good place to purchase the kit for a good price and does anybody have any words of wisdom for installing the kit?

Thank you all kindly

b_ron
04-13-2015, 06:24 PM
Can't go wrong with SPC or Ingalls. In the end, they all do the same thing (just threaded rods). Not sure if kseriesparts still carries them.

Her-Name's-Ally
04-13-2015, 06:51 PM
Those are great. I have the T1R Bmax and they have lasted me some time.
http://www.speedstar-racing.com/store/catalog/product_info.php/products_id/511?osCsid=abcd16710c25818888b970fabf7e8df8

I am pretty sure buddy club has a nice kit.

Almost all the same to be honest.

El Mocha King
04-14-2015, 07:49 AM
Thanks for the input. I found the kit for $139.94 with free shipping from Summit Racing. Is that a pretty good price?
http://www.summitracing.com/parts/sps-67230/overview/year/2003/make/honda/model/civic

Her-Name's-Ally
04-14-2015, 12:55 PM
sweet good deal.

Her-Name's-Ally
04-14-2015, 12:56 PM
The link showing has em for $69

El Mocha King
04-14-2015, 02:00 PM
$69.97 is the price for one. They are sold individually.

T_Virus
04-18-2015, 12:05 AM
I had SPC's before and never had an issue with them.

BarracksSi
04-20-2015, 03:46 AM
+1 for SPC. Had mine on for at least ten years and they've stayed put.

El Mocha King
04-21-2015, 10:56 AM
Thanks for the input everybody. I am going to order them today.

.colin
04-23-2015, 09:03 AM
I prefer the Ingall's kit. The ends are cast / forged as 1 pc whereas the SPC is welded. I'm sure it doesn't matter, they are both good kits.

El Mocha King
04-23-2015, 04:51 PM
I prefer the Ingall's kit. The ends are cast / forged as 1 pc whereas the SPC is welded. I'm sure it doesn't matter, they are both good kits.
Thanks for the info! It seems like the Ingall's kit is cheaper everywhere I look as well. I haven't bought the SPC kit yet so I think I will go with this one instead.

cant catch me
04-29-2015, 08:05 AM
After installing my d2 coilovers i followed up with a skunk 2 camber kit. Around 160.00 butdamn near bullet proof!