02 type s RSX will fit?

[sayurasem]

I'm wondering if the type s dc5 suspension will fit the ep3?

[2004ep3hatch]

It will fit with minor modifications. You can get Mugen SS which is a direct replacement and sits similar to the A-Spec. What is your reasoning for getting dc5?

[Passenger]

Yeah.

Sent from my LG-D850 using Tapatalk

[sayurasem]

So I jump the gun an got the 02 type s stock suspension for 100 bucks.
so I've been reading so I need rsx tie rod end and shave the bushing for rear struts. Btw how to shave bushings? Never done this before. Or can I get new bushings?

Btw the reason is only 100 bucks. And I think type s or rsx suspension in general is a bit stiffer than ep3.

[Hasbro]

Mugen is a 1.4" drop. A-Spec is about a 3/4" drop and is equivalent to the Type R suspension.

[Rasy]

Get a grinder and some time. You'll need to shave 3-5mm on each side of the bushings on the rears. And you're correct about the tie rods.

[2004ep3hatch]

6999

You need number 7. Just go to your local parts place and get new bushings for the EP3. They may be 10.00 each. I did mine without a press. Just a socket and hammer and they came right out. Same with installing them or you can go a local shop and throw them a few bucks to put the new ones in.