Eddie Murphy
04-12-2017, 06:38 AM
*First off, Thanks-A-Million for the meticulous build Jose Mercado. Hats off to you sir...
MercRacing MR900 Supercharger Kit (http://mercracing.net/product-category/supercharger-kits/)utilizes EATON’s latest 6th Generation supercharger. These Twin Vortices Series(TVS) Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in a patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors.
*An RDX crank pulley(6.37") and a 2.80" Blower Pulley are in place and dyno tuning will be done shortly after install.
*The tuner installed a 50* VTC Gear, a Z3 Upper Chain Guide, and an Inline Pro Timing Chain Tensioner (https://www.inlinepro.com/s1/p-311-k-series-race-spec-timing-chain-tensioner.aspx) before tuning.
*FUELING - DeatschWerks 1000cc Fuel Injectors(17U-08-1000-4) (http://deatschwerks.rpmware.com/deatschwerks/deatschwerks-fuel-injectors/17u0810004/i-411473.aspx)
and DeatschWerks DW65c fuel pump(9-651-1009) (http://deatschwerks.rpmware.com/deatschwerks/deatschwerks-vehiclespecific-intank-fuel-pumps/96511009/i-527445.aspx)
http://mercracing.net/wp-content/uploads/2017/03/DSC_45133-600x436.jpg
This MercRacing K-Series adjustable belt auto tensioner (http://mercracing.net/shop/k-series-adjustable-belt-auto-tensioner/)is a strong, solid and serviceable solution to your supercharger belt wrap, belt adjustment and tensioner needs. No belt slip for me.
http://mercracing.net/wp-content/uploads/2017/03/IMG_6780-600x450.jpg
A Garrett Front Mount Intercooler (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-INT-001&Category_Code=INT) is piped into the manifold.
http://www.atpturbo.com/mm5/graphics/00000001/Catalog%20Images/Intercoolers/ATP-INT-001450.jpg
Custom Piping done by Jose Mercado using A Large Universal Aluminum Pipe Kit, 2.5"
(http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)http://www.frozenboost.com/images/product/aluminum_largekit_picture.jpg (http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)
(http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)An Artec Industries Battery Boxes OP5101 (https://www.summitracing.com/parts/rte-op5101)for group 51 battery(stock size battery) was used to relocate the battery under the passenger side head light.
https://static.summitracing.com/global/images/prod/mediumlarge/rte-op5101_ml.jpg
These American Autowire external battery jumper blocks (https://www.summitracing.com/parts/aww-500931) are used in case a jump start is needed without having to remove the front bumper.
https://static.summitracing.com/global/images/prod/mediumlarge/aww-500931_ml.jpg
These Painless Performance alternator wiring kits (https://www.summitracing.com/parts/prf-30700)are used for wiring it all up.
https://static.summitracing.com/global/images/prod/mediumlarge/prf-30700_ml.jpg
Good instructions for wiring and battery relocate here: https://www.kseriesparts.com/instructions/batteryrelocatekit.pdf
Modification to the Garrett FMIC:
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17634566_10210396473761186_7203484636814843922_n.j pg?oh=919c7f50c1b7f0643622948728ca071e&oe=5ADB9153
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883863_10210396473721185_4594958472823473595_n.j pg?oh=9448e9cd63cb5b76bd0a12a931f688e3&oe=5B25ECAE
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862391_10210396474241198_5410902189814870796_n.j pg?oh=ce004a350187cbfc4e06918283c9740e&oe=5AE0CC27
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17884365_10210396473641183_5157305151133896285_n.j pg?oh=f91b35d56d2e8edad89cbd96ecfae26a&oe=5AE301CE
SPAL Slim Fans(7.5" puller) (https://webstore.spalusa.com/en-us/product/0693/products/fans/7-5-fans/30100358/va14-ap7-c-34a-7-5-s-12v.aspx) were used in place of the OE fan, the OEM was too big to fit the intercooler piping. A repainted and cleaned up OEM condenser fan was used in this also. Thanks to my bud Sing for sending the cond. fan.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17634709_10210396473841188_1135337744981545684_n.j pg?oh=88ef775be70e78695f190a1b377c6b13&oe=5AF7A51F
Custom Radiator brackets fabbed from original T-Bar.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862373_10210396473801187_8514643657650056924_n.j pg?oh=ac174e77bd7cc764796f292ac2375704&oe=5AF184F8
Battery bracket painted and placed under the passenger side head light.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903496_10210396510242098_7155976612088226862_n.j pg?oh=7cbbd52f4190908bf465963a7fa768f5&oe=5AFAAE47
Lower Battery Bracket Fab:
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883609_10210397771393626_9147043504013361476_n.j pg?oh=8075a42b3ced9bdf8cbc235aaa5ba7a2&oe=5AF7EE7B
Remote Jumper Terminals placed where the battery box used to be.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883931_10210396508602057_6588439790832356908_n.j pg?oh=fdd5962d498e414efc907acd063c3e10&oe=5AEB21FB
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17861861_10210396508682059_2242132292959411470_n.j pg?oh=741891ea534d5a02b287bb346c71988d&oe=5ADE241F
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903735_10210396508562056_4152171184922043044_n.j pg?oh=ab5d25b1177ff5c611a40ce44db8f496&oe=5AED5D2E
AEM V2 Intake cut where it's 3.5"
Now it's a custom made AEM V3.5
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17759812_10210396513362176_6313210672689130759_n.j pg?oh=f1e7aa7ba7b75d43e329ece096271cf4&oe=5AE738AD
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903952_10210396513482179_5512789244989499066_n.j pg?oh=351078db860382981cce99078d9a7de1&oe=5ADE7EB4
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903961_10210396513682184_717309903330689522_n.jp g?oh=a4029118b31f93d4218cc9498752acab&oe=5AE364C7
Koyo Radiator(V2574) (https://thmotorsports.com/i-35587.aspx?utm_source=GoogleShopping&utm_medium=CSE&utm_content=35587NOFITMENT&utm_campaign=GoogleShoppingSeanNOFITMENT&1&gclid=Cj0KEQjww7zHBRCToPSj_c_WjZIBEiQAj8il5P_0tVCc 6Mfhs0eeel1f6TWON6CQXXciFZiDI_S7MsEaAo4C8P8HAQ) installed but there was no room for the overflow so we made one out of spare parts in Jose's garage. Looks great and works perfectly with plenty of volume.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862693_10210396517842288_369306036645530146_n.jp g?oh=433070cd3af9786c1075bd94fe0876d9&oe=5AEE6780
Stock rad cap won't fit so I got the Koyo rad cap (https://thmotorsports.com/koyo/koyo-radiator-cap/skc13/i-35678.aspx)
This is how it sits finished up and ready to rock!
https://scontent-atl3-1.xx.fbcdn.net/v/t31.0-8/17880179_10210396518522305_4750126709974095020_o.j pg?oh=8827389fc4e98cbba9398d8acc00cf53&oe=5AF6A31A
Ortizcustompods (http://www.ortizcustompods.com/honda.html) gauge pod and 14point7 (https://www.14point7.com/) Gauges in the cockpit.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/13439031_10210396517522280_2920985888720289762_n.j pg?oh=ee19897716acfddcaada04b67985216e&oe=5ADF9907
All washed up and ready to roll out.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/18698384_10210798515211971_4858196684496094630_n.j pg?oh=19102bafeba4968e258bfab5629f3adb&oe=5AEBDF7D
Thanks again MercRacing (https://www.facebook.com/MercRacing/?pnref=lhc)
MercRacing MR900 Supercharger Kit (http://mercracing.net/product-category/supercharger-kits/)utilizes EATON’s latest 6th Generation supercharger. These Twin Vortices Series(TVS) Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in a patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors.
*An RDX crank pulley(6.37") and a 2.80" Blower Pulley are in place and dyno tuning will be done shortly after install.
*The tuner installed a 50* VTC Gear, a Z3 Upper Chain Guide, and an Inline Pro Timing Chain Tensioner (https://www.inlinepro.com/s1/p-311-k-series-race-spec-timing-chain-tensioner.aspx) before tuning.
*FUELING - DeatschWerks 1000cc Fuel Injectors(17U-08-1000-4) (http://deatschwerks.rpmware.com/deatschwerks/deatschwerks-fuel-injectors/17u0810004/i-411473.aspx)
and DeatschWerks DW65c fuel pump(9-651-1009) (http://deatschwerks.rpmware.com/deatschwerks/deatschwerks-vehiclespecific-intank-fuel-pumps/96511009/i-527445.aspx)
http://mercracing.net/wp-content/uploads/2017/03/DSC_45133-600x436.jpg
This MercRacing K-Series adjustable belt auto tensioner (http://mercracing.net/shop/k-series-adjustable-belt-auto-tensioner/)is a strong, solid and serviceable solution to your supercharger belt wrap, belt adjustment and tensioner needs. No belt slip for me.
http://mercracing.net/wp-content/uploads/2017/03/IMG_6780-600x450.jpg
A Garrett Front Mount Intercooler (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-INT-001&Category_Code=INT) is piped into the manifold.
http://www.atpturbo.com/mm5/graphics/00000001/Catalog%20Images/Intercoolers/ATP-INT-001450.jpg
Custom Piping done by Jose Mercado using A Large Universal Aluminum Pipe Kit, 2.5"
(http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)http://www.frozenboost.com/images/product/aluminum_largekit_picture.jpg (http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)
(http://www.frozenboost.com/aluminum-pipes/aluminum-pipe-p-762.html)An Artec Industries Battery Boxes OP5101 (https://www.summitracing.com/parts/rte-op5101)for group 51 battery(stock size battery) was used to relocate the battery under the passenger side head light.
https://static.summitracing.com/global/images/prod/mediumlarge/rte-op5101_ml.jpg
These American Autowire external battery jumper blocks (https://www.summitracing.com/parts/aww-500931) are used in case a jump start is needed without having to remove the front bumper.
https://static.summitracing.com/global/images/prod/mediumlarge/aww-500931_ml.jpg
These Painless Performance alternator wiring kits (https://www.summitracing.com/parts/prf-30700)are used for wiring it all up.
https://static.summitracing.com/global/images/prod/mediumlarge/prf-30700_ml.jpg
Good instructions for wiring and battery relocate here: https://www.kseriesparts.com/instructions/batteryrelocatekit.pdf
Modification to the Garrett FMIC:
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17634566_10210396473761186_7203484636814843922_n.j pg?oh=919c7f50c1b7f0643622948728ca071e&oe=5ADB9153
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883863_10210396473721185_4594958472823473595_n.j pg?oh=9448e9cd63cb5b76bd0a12a931f688e3&oe=5B25ECAE
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862391_10210396474241198_5410902189814870796_n.j pg?oh=ce004a350187cbfc4e06918283c9740e&oe=5AE0CC27
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17884365_10210396473641183_5157305151133896285_n.j pg?oh=f91b35d56d2e8edad89cbd96ecfae26a&oe=5AE301CE
SPAL Slim Fans(7.5" puller) (https://webstore.spalusa.com/en-us/product/0693/products/fans/7-5-fans/30100358/va14-ap7-c-34a-7-5-s-12v.aspx) were used in place of the OE fan, the OEM was too big to fit the intercooler piping. A repainted and cleaned up OEM condenser fan was used in this also. Thanks to my bud Sing for sending the cond. fan.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17634709_10210396473841188_1135337744981545684_n.j pg?oh=88ef775be70e78695f190a1b377c6b13&oe=5AF7A51F
Custom Radiator brackets fabbed from original T-Bar.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862373_10210396473801187_8514643657650056924_n.j pg?oh=ac174e77bd7cc764796f292ac2375704&oe=5AF184F8
Battery bracket painted and placed under the passenger side head light.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903496_10210396510242098_7155976612088226862_n.j pg?oh=7cbbd52f4190908bf465963a7fa768f5&oe=5AFAAE47
Lower Battery Bracket Fab:
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883609_10210397771393626_9147043504013361476_n.j pg?oh=8075a42b3ced9bdf8cbc235aaa5ba7a2&oe=5AF7EE7B
Remote Jumper Terminals placed where the battery box used to be.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17883931_10210396508602057_6588439790832356908_n.j pg?oh=fdd5962d498e414efc907acd063c3e10&oe=5AEB21FB
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17861861_10210396508682059_2242132292959411470_n.j pg?oh=741891ea534d5a02b287bb346c71988d&oe=5ADE241F
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903735_10210396508562056_4152171184922043044_n.j pg?oh=ab5d25b1177ff5c611a40ce44db8f496&oe=5AED5D2E
AEM V2 Intake cut where it's 3.5"
Now it's a custom made AEM V3.5
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17759812_10210396513362176_6313210672689130759_n.j pg?oh=f1e7aa7ba7b75d43e329ece096271cf4&oe=5AE738AD
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903952_10210396513482179_5512789244989499066_n.j pg?oh=351078db860382981cce99078d9a7de1&oe=5ADE7EB4
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17903961_10210396513682184_717309903330689522_n.jp g?oh=a4029118b31f93d4218cc9498752acab&oe=5AE364C7
Koyo Radiator(V2574) (https://thmotorsports.com/i-35587.aspx?utm_source=GoogleShopping&utm_medium=CSE&utm_content=35587NOFITMENT&utm_campaign=GoogleShoppingSeanNOFITMENT&1&gclid=Cj0KEQjww7zHBRCToPSj_c_WjZIBEiQAj8il5P_0tVCc 6Mfhs0eeel1f6TWON6CQXXciFZiDI_S7MsEaAo4C8P8HAQ) installed but there was no room for the overflow so we made one out of spare parts in Jose's garage. Looks great and works perfectly with plenty of volume.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/17862693_10210396517842288_369306036645530146_n.jp g?oh=433070cd3af9786c1075bd94fe0876d9&oe=5AEE6780
Stock rad cap won't fit so I got the Koyo rad cap (https://thmotorsports.com/koyo/koyo-radiator-cap/skc13/i-35678.aspx)
This is how it sits finished up and ready to rock!
https://scontent-atl3-1.xx.fbcdn.net/v/t31.0-8/17880179_10210396518522305_4750126709974095020_o.j pg?oh=8827389fc4e98cbba9398d8acc00cf53&oe=5AF6A31A
Ortizcustompods (http://www.ortizcustompods.com/honda.html) gauge pod and 14point7 (https://www.14point7.com/) Gauges in the cockpit.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/13439031_10210396517522280_2920985888720289762_n.j pg?oh=ee19897716acfddcaada04b67985216e&oe=5ADF9907
All washed up and ready to roll out.
https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/18698384_10210798515211971_4858196684496094630_n.j pg?oh=19102bafeba4968e258bfab5629f3adb&oe=5AEBDF7D
Thanks again MercRacing (https://www.facebook.com/MercRacing/?pnref=lhc)