PDA

View Full Version : RSX rear sway bar



SiCO
02-15-2003, 04:44 PM
For those of you that have bought the RSX rear sway bar, how much did you end up paying?

I went to the local Acura dealer, and got quoted $78 for just the bar. I thought I remember people getting some lower prices, but just not sure. Anyway, how much more were the bushings and end links when you upgraded.

JSIR
02-15-2003, 07:17 PM
You're not far off, I think some guys were quoting $60 US, I've always said $75 with the two rubber bushings.

All you need is the bar, and the two rubber bushings that go around the bar, you don't need any endlinks or bushing support plates, you can re-use all the stock hardware. The rubber bushings shouldn't be more than $10 for the two of them. Check around other dealerships you might be able to get it a bit cheaper, either way compared to the aftermarket bars that is still a deal.

SiCO
02-15-2003, 07:32 PM
thanks a bunch

JSIR
02-15-2003, 07:36 PM
check out the post in the engine forum, there are some replies on where to buy the bar, and one guy selling the jdm version.

Suk02Si
02-16-2003, 05:35 AM
Check out the RSX forums, I saw a couple for sale asking for offers. I'm picking up the JDM rear sway, 22mm, and also a type s front sway which i think is 23mm.

02SilverSiHB
02-16-2003, 12:02 PM
I bought mine for 50 from my friend Dave "ConeKiller". I ended up using my stock bushings. I didn't have any problems with it at all. It took like 10 minutes to install. I say screw the RSX bushings, keep the ones you have, less money to spend.
Anyway, try here: http://www.acuraautomotiveparts.org/acura/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=RSX&catcgry2=2002&catcgry3=3DR+RSX&catcgry4=KA5MT&catcgry5=REAR+LOWER+ARM
you can get it for 60.16 not sure how much shipping is. It's item number 5. If you really want the bushings, it's item number 6 for like 3.45