Help!!

[clownswlleatu]

So I tried to put on my rear camber kit myself. Everything went fine on the first side, but on the second side when I was putting in the last bolt I cross threaded the hell out of it! And now I can't get it out! It's about 3/4 of the way in. I need advice on what I should do. I had to put it all back together and drive a short distance. Didn't seem to really affect anything with the one bolt stuck 3/4 of the way in but I know it's not safe. HELP!:confused:

[Suk02Si]

WD-40? How did you cross it so badly? You might have to it to a shop so it can be pulled out with an air gun and re-threaded.

[clownswlleatu]

I was using an air gun when I put it in that's how it got messed up so bad. I couldn't get it back out with the gun.

[Suk02Si]

oh damn:eek: :D

always always thread it by hand first, esp if you plan to use air tools;)

[clownswlleatu]

Yeah I know I thought it was started. I was wrong! So any idea's?

[Suk02Si]

maybe a breaker bar to get it out? It's gonna have to be re-threaded.