K-manager, K-Pro & other ECU Tuning
If you have a tune and want to share it with the rest of Ephatch. Please post it here as an attachment so current and future Ephatchers can use it. Make sure to post your setup and the mods associated too. Thank you! NOTE---- ephatch or the members posting the calibrations cannot and will not...
Since I have seen this question pop up a few times I figured I could just make a thread with the link and hope it gets sticked. If we cant sticky a link to another forum then we could always make are own database. http://www.k20a.org/forum/showthread.php?t=33650
Re-keying an Immobilizer This is the standard Honda immobilizer reprogramming process. This process also works matching an 02-04 ECU to an 05 or 06 RSX-S. You will use the VIN number from your 2005-2006 Acura. The VIN number is not stored in the 02-04 ECU. Hondata cannot provide any assistance...
http://www.k-series.com/dtc.html
greetings my fellow ep3 enthusiast! i finally have the chance to upgrade my vroom-vroom silver 04 sir . yey! even though the car only have 160hp (or probably less) i wanted to prep the car's handling performance first. i am working towards the k24a2 engine - mainly for the torque. and i would...
might be looking to sell my kpro soon since my engine just blew and im sick of this whole thing anyway mine is an 04, i looked on majestic and saw that 02-03 ecu's have different part numbers than 04-05 ecu's. I know im gonna have to take it to a dealer to get the immobilizer programmed but...
ok i just bought a ep3 about 2 weeks ago i have been reading about kpro reflashes and all that stuff.. what im getting at is factory redline is 6800 " i think" corrrect me if im wrong.. mine is redlining at 7400 " confused" why is this what do i have kpro or a reflash??? thanks...
Does anyone know how to set up the launch control on kpro? If so please help, going to the track soon hoping to set it up before. ;)
seems like hondata just slashed their prices for the reflash for around 50% http://www.hondata.com/reflash_civicsi.html $295 for reflash is very tempting...but I'm not sure if the extra cost in gas is worth the gains. Now if only they would slash their kpro prices...
anyone know a tuning shop that will reflash our cars in san diego? not looking to drive to LA, kinda defeats the purpose of a cheap mod when 40$ is spent on gas. Looking for a reflash in SD. thanks.
hey all i have a k24a1(stock motor). long story but basically the shop i went to set my vtec to 5600 rpm and i told them that wasnt right so then they put it at 2400, its dyno tuned with vtec at 2400. is this the right engagment?
Okay so if i just bought this prb ecu, can i just take the ep one out and put this one in? and would it still work? And my plan is to get kpro (whenever i have cash haha) but i can take that out and put it into another car, i know that but whats the whole deal with the immobolizer or something?...
does krpo use the same sensor as the stock gauge cluster to determine engine temp? My stock gauge cluster does not read and engine temp, but in krpo it does any ideas on how to fix this?
OK IM DONE WITH GATHERING MY PARTS FOR MY K24A1 SWAP:mbiggrin: NOW IM PLANNING ON BUYING KPRO!!!!!!!!!!! BY THE END OF THIS MOUNTH MY CAR IS A DD SO SHOULD I BUY IT NEW OR USED WHATS THE DIFF? WHAT IS GOING TO BE EASIER AND WHERE CAN I BUY ONE USED I DONT GOT THE TIME TO SEND MY ECU IN ...
I just upgraded to JRSC race kit from the street kit complete with kpro (thanks superd16girl and 04EP3Hatch for the used goods, it all works perfect) and dedicated netbook. The TPS on the skunk2 70mm throttle body had a CEL because its in a slightly different idle position than stock. so...
I own a 04 ep3 with everythign stock except air intake. I am interested in buying a hondata k-pro. I wanna know what are the best specs or the best setup to get the most out of my k-pro and what is the best reliable place to goget it all tuned and done at?
When you set readiness with KPro, do all the readiness items change their status to "Supported" or do they still stay "Not supported", but will trick the OBD2 state inspection computer to thinking it is ready? I'm clicking the "Set Readiness" link under "Online" but I don't see anything...
i have some local selling a k pro ecu, but he said it was for the d17 engine, i was wondering if i could still buy this and use it in my 02 civic si with a k20a3? i dont know much/really anything about k pro and im getting it for a hell of a deal. if anyone has any information for me, it would be...
ok so im trying to get my k24a2 swap but i dont know what kpro to get =( i really want my baby back on the road again she havent seen the road for almost 7 months now and i really miss driving her...
take a look at my kal i made 197 and 147 torque...I had it tuned by miller @ nrgtech but i think i could get a lil extra out
how do i use this feature in kpro properly? Ive tried searching and they say yoou need a micro pressure switch?!?
Will this pass a california smog test?
couldn't find any other thread to post this in.. so here goes. word is this sensor sometimes doesn't last too long i had mine come on at around 60k miles. had code read for free at honda dealer and as it turns out to be they don't sell the individual sensor *according* to them I'm required to...
Hello, i purchased a 02 Ep3 3 weeks ago, and seem to have a couple issues, the car is a2 swapped with headers, intake, type r internals, 440 injectors, fuel rail, and running Kpro. Now, it seems to be running really slow.. The previous owner said it could take a stock S2k, but i can hardly...
im just wondering how people on here like their emanage. i was planning on going with kpro but thought i would see what people thought about emanage ultimate first. thanks
Sorry I know this has to be a really dumb question, but I'm still a noob as far as K-series' go. Are there any flaws running a PRB K-Pro'd ECU on my K20A3? Just would like to have the PRB ready for when I do a 6-speed + K20A2 or K24A2 in the future, but also want K-pro
Thinking I'll swap in the coming months and want to know if I can run the RSX-S reflash on the k20a2 in my EP on the RSX-S/PRB ECU. I couldn't find the answer anywhere and just want to check before I start spending. Also, if I want to take care of the reflash before I swap, can I send the...
will the reflash work on an 05 ep3? i see that on the website it says only 2002-2004 models. is there a reason why it wont work on my 05?
does anyone have a kal. for a k20a2 with AEM v2/DC RH/ Greddy evo2/ honadata IMG???
There are currently 3 users browsing this forum. (2 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
