Forum: Turbos

Look at getting a PB kit. But I'm having some problems picking a upgrade turbo. The one that comes with the kit is a t3/t4. I should start by saying that the turbo will be installed on a stock k24a2. future mods will be a 2.6L stroker, maybe a head massage. I want a turbo that makes...

If I get the rev hard tubo kit will I need an intake and a header. I just want to know so I can save a few bucks. Thanks

just seeing if anyone has any experience with shunk2 on turbo'd cars. i just got a skunk2 throttle body and intake mani. just wondering if it was a good choice or not.. let me know

So a week ago i picked up a used greddy turbo kit on here. The install went smoothe everything went on. No problems just a couple of stubborn bolts . The usual. The kit came with rc 550cc saturated injectors that appeared to be working fine. With the first start up the car appeared and...

Greetings..I will switch to custom pipe 3" and need to know what that does not sound much and do not affect hp.. which do you recommend for turbo? thanks in advance..!.

so im new to thw whole turbo thing..but my buddie is seling a gt28 that was going to go in his 240 and he said its rebuild with garett internals.. and it all looks brand new..no shaft play..is this a good turbo to run on my k20a3..? it has a internal waistgate.. what are the waistgate springs set...

Hey, just wondering what octane you guys pumping and boost psi level. Kit: Psi: Octane: Kit: Stock Greddy Psi: 8.5lbs Octane: 94 no methanol

Okay so i'm pretty new to the whole boost thing, what all would i need on my a3 motor to safely run boost?

Can anyone confirm how high would the stock map sensor read? I've heard a few different numbers but would like to confirm. Also what would I need to change in Kpro? Im guessing just the boost cut protection to about 1.5-2psi over what my desired level is. Thanks -Jordan Mods:

So a while back, around November to January, posted up a thread with a pieced together turbo kit and had some problems tuning...Made 262 whp with a slipping clutch at 9 psi. Well my car is back in the shop for some new parts. So far I've installed a competition clutch stage 4 and light weight...

Hi EP fellas..Now my EP is tuned I want to protect the investment I made, of small details that eventually can damage the turbine and engine.For example the oil catch can..what brand do you recommend,where install or how install in a K20A3 engine? considering the Greddy turbo kit that my car has...

Long story short, A small mix up and i boosted 22psi instead of 12. My block has a whole in it, somehow the starter took some damage. Im picking up a new k24, i was wondering if all the starters are the same, or do i need to find another a3 one. Ill update the thread with some pictures when we...

Hey Guys, Shout out to all those in the immediate SoCal Area. We are looking for a volunteer to test our Turbo 1 Camshafts on at our Skunk2 Facility in Norco, CA. We are specifically looking for a K20A3 equipped EP3 with a low boost turbo setup (10psi or less). Free baseline testing and you of...

just wondering how far i can go with my k20a2 stock block. does anyone know the max pounds a greddy turbo kit can push? please get at me. thanks

Well yesterday a buddy stopped by from out of town. I was in the process of cleaning the shed out and had tossed the T28 turbo from my old Talon out in the lawn. He picked it up and suggested we build a jet engine out of it. 2 hours later the turbo was spinning under it's own power. My camera...

Thinking of going turbo very soon. But before I install it... what procedures or tests can i perform to see the condition of my motor. I've been throwing some CEL's recently and that cane be attributed to the o2 sensors. They will be replaced soon. I've thought of the following: 1.) Prior...

Guys i was on dyno again today since a few month with new walbro pump, new P565 Greddy Internal Wastegate, New Mac Boost Solenoid and the car did the same. Today we did 14 psi stable but when we tried to go 22 psi the car began to level down the boost to 10 - 8 psi. What do you think is happening?