Boost in a bottle.
I usually try to help out everyone with their nitrous questions on all the sites that I am a member of, so I compiled a FAQ sheet. How nitrous works: What is the difference between a wet and dry kit?
So I'm still looking for parts for my car, even though I won't see it again until December. Anyway, I've been thinking about nitrous today - mainly because I've never really played around with it. I'm not much a drag person, but I think it would be cool to toy around with for a few months,...
where do you guys tap for the fuel line? aftermarket fuel rail? or just replace the plastic line from the fuel rail with a rubber one and put a "T" ? does anybody have any pictures of this installation? thanks in adavance guys.
I just picked up a used NOS kit from a friend at an insane steal (I'd have to kick my own ass for passing this up, esp. since most parts are new and the rest have only been used for 1 bottle). I was going to go turbo, but between the cost and my wife killing me for spending that much cash, I had...
I see no one has posted a thread since 2008 but here goes. I finally gave up on the turbos and superchargers since they are sooo expensive. I lost all hope in making any horsepower upgrades until I started reading up on nitrous. I researched and found out that not only is it a very cheap option...
so im almost done with my install ( taking my sweet ass time haha..) anyways i have almost everything hook up except for my new skunk2 fuel rail that i just got for fathers day, everything else is already installed and wired except for the white wire for the WOT that goes on the tps. so heres my...
Iam considering spaying my 04 si, I have a NOS wet kit laying in my garage but before I do that there are some questions I have One how do the K-series motors run on spray and are they reliable Two what kinda times can I expect from a 50 shot I would appreciate it if anyone would be willing...
does/has anybody used this kit? is it good compared to others? im only going to do a 40-50 shot.
i have a k&n SRI right now and i am about to get megan shorty header and 2.5" greddy evo2 exhaust. my future plans are to get Apexi SAFC NEO Fuel Management Computer and then a wet nitrous kit. i only want to push 40hp(50hp max) because its my DD and a stock k20a3. What kit brand do you think i...
i had had plenty of civics with nos, i am just wondering how much of a shot yall are using. i am puting my kit in this weekend, i am going to start with 50 to see how it does
just wondering what a good set up is. I'm trying to figure out whats the best to run on a stock motor. I've been seeing 50-65 shot is safe anything higher is risking it. Do I need colder plugs? Push activation or WOT sensor? I'm looking in getting a kit soon just need to find a kit without a...
This is a quick rundown of my civic's setup to give you a heads up before I ask my questions. I have forged pistons (9:1) and rods with a greddy turbo kit, hondata Kpro, and now thinking about a 75 shot of n20. I am running as much boost as possible on my turbo, can I use nitrous when I am at full...
I just got a ZEX wet nitrous kit with the new purple box that has everything built into it. It supposedly reads the throttle position off some wire and I need to know how to get a reading off the TPS for the purple box to read. For those of you who have installed nitrous before, please let me know...
Ok so it would seem as though the thread that had the NGK spark plug part # was lost, anybody remember what it was? I am going to the track next friday and need to order the plugs. Before anybody says it I have seached the old threads and they dont have the spark plug I am looking for. Mystery???
well what is the biggest shot of nitrous a stock ep can take safely? somebody told me 55
Ok. Im shopping for a direct port kit... looking at the NOSSLE setup NOS offers. Its basically a tap/spacer that fits between the fuel injector and the IM. Of course you have a nitrous line and a fuel line running to each one. Does anyone have any experience with this setup/these nozzle types? ...
with a 50 shot and a CAi and an Exhuast...what can i expect to break down with a few uses of my 50 shot? i wana take ne precautions necessary, kuz i hear about all the boys runnin boost having to eventually replace there clutch kuz of the boost.:yellm: :yellm:
well guys i havent really posted on this new ephatch yet, but i just recently added a nos wet kit into my car. i have fijita cold air, dc rhs, custom 2.5 catback, and intake manifold thick gasket, the nitrous kit as i has said before is a nos kit wet system the only other thing i added to...
I searched but couldn't find a thread related to this specifically. I'm about to put my kit on and wanted to see where everyone is mounting there bottles. Post pics if you have them!
Does anyone have any experience using nitrous during turbo spool up? I wasn't sure you could use nitrous at lower rpms but I guess small amounts could be a crutch...not sure....any info?
Hey guys last saturday,I was racing a budd`e of mine and .I began to notice the clutch started to slip in 3rd pay no mind and thinkin it was just a one time thing.I come around ot give it another go and it began slippin in first so more a less time for an upgrade, I `ve been serching around and...
Someone mentioned to me the other day that I should put Nitrous to the EP to give it all it's got. I've got a JRSC, just wondering if it is safe to spray with the JRSC. Still on the stock A3.
I really really want to get a nitrous kit. Can someone just give me some basic info about it? My car is a lease for four years i plan on modding it and either buying it when the four years is up or taking off all the mods and giving back. Ive hear alot about people blowing up their engines with...
Looking at getting a 50 shot, cheaper than turbo/jrsc...I'm getting beat by too many cars and need more power. Just wondering if nitrous and cold Canadian winters will work together? Can't find any info anywhere about this. Let me know the details, thanks.
Here are two direct port nitrous equipped mani's. http://i54.photobucket.com/albums/g96/talonxracer/directportnitrousonRBC.jpg This RBC mani has been ported and Extrudehoned. http://i54.photobucket.com/albums/g96/talonxracer/RBCnitrous003.jpg...
how much N.o.s. is too much... is 100hp to much to ask...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules