Another EMUSA turbo build, this time in the 808!
So here we go kiddies, one nother EMUSA build. I am an EP3 noob, only had my ride for about a year and a half.....it has changed ma life.
Big ups to AKEP's sticky, Ephatch, all the other kiddies who boosted and lived to tell about it, and NewBrazza. He's hand fed me info and after peeping his build thread made me pull the trigger to boost! Check his thread it's dope, this one will be similar hopefully hitting some of the things his did and didn't. Being a newb I had all the same old questions, and some that were only answered by badgering people and hours and hours of research, and still need to know more! So hopefully this will help some of you.
Here it is......Finally after the post office lost it then found it......the box!
http://i734.photobucket.com/albums/w...8-Exposure.jpghttp://i734.photobucket.com/albums/w...7-Exposure.jpg
Let's get this party started
http://i734.photobucket.com/albums/w...9-Exposure.jpg
http://i734.photobucket.com/albums/w...5-Exposure.jpg
Everything came packaged nice, it seems that I have all my parts and they are correct, I feel blessed...
http://i734.photobucket.com/albums/w...8-Exposure.jpg
Waste gate feels nice not to cheap, next up the oil feed line.
http://i734.photobucket.com/albums/w...0-Exposure.jpg
Type RS Blow off Valve, though it was suppose to be an HKS knock off, but it still fits the already welded flange.
http://i734.photobucket.com/albums/w...2-Exposure.jpg
As some I think has said before definitely needs to be cleaned up
http://i734.photobucket.com/albums/w...3-Exposure.jpg
Intercooler was nicely packaged, not banged up, and I got my mounting brackets. eeeeeeeyeeeeaaaahhhh
http://i734.photobucket.com/albums/w...2-Exposure.jpghttp://i734.photobucket.com/albums/w...5-Exposure.jpghttp://i734.photobucket.com/albums/w...6-Exposure.jpg
The mani was boxed nice as well, looks pretty good too.
http://i734.photobucket.com/albums/w...8-Exposure.jpghttp://i734.photobucket.com/albums/w...9-Exposure.jpg
Now, the down pipe welds, look nice, I got the shop ready have to modify the down pipe to a three bolt flange and cut it to fit, also have a custom 2.5" being made for it as well, for now, after a bit I will go TKeller 3 inch all the way through......
http://i734.photobucket.com/albums/w...7-Exposure.jpg
http://i734.photobucket.com/albums/w...1-Exposure.jpg
Intercooler piping was all there with the correct fittings as well!
http://i734.photobucket.com/albums/w...1-Exposure.jpg
The return line, I am going to tap my pan, but the fitting they give is aluminum, so maybe honda bond and some JB? Or a steel fitting welded.
http://i734.photobucket.com/albums/w...7-Exposure.jpg
And of course the Snail, well packaged to I might add..........
http://i734.photobucket.com/albums/w...2-Exposure.jpghttp://i734.photobucket.com/albums/w...3-Exposure.jpg
Coupler for the TB 2.5" to 3" EMUSA Special, doesn't come with the kit.
http://i734.photobucket.com/albums/w...6-Exposure.jpg
VMS Manifold block, not necessary but looks good and hopefully will help keep the vac lines clean...
http://i734.photobucket.com/albums/w...7-Exposure.jpg
And some other goodies, MAC solenoid (which I think I have the install down!), Down pipe from Ebay (Newbrazza, After I ordered it I realized it was just like yours doh! So I am sure I will have to trim it.) And glow shift specials, with the pillar kit they assured fit the Ep3...Sike! Got a universal on the way..
http://i734.photobucket.com/albums/w...9-Exposure.jpghttp://i734.photobucket.com/albums/w...1-Exposure.jpghttp://i734.photobucket.com/albums/w...8-Exposure.jpghttp://i734.photobucket.com/albums/w...3-Exposure.jpg
For the fuel set up. Deatchwerks 600cc injectors, and 65c fuel pump. (maybe I'm lazy but I like the plug-n-play)
http://i734.photobucket.com/albums/w...5-Exposure.jpghttp://i734.photobucket.com/albums/w...6-Exposure.jpg
And the scragglers, the tp8, oil restrictor(not shown) which I am not exactly sure where to hook it up!, and Banjo bolt..just in case.
http://i734.photobucket.com/albums/w...7-Exposure.jpg
And..the engine bay, before we go to work on it..........RBC taking up so much room!(Fujita short ram, DIY JDM wrinkle paint valve, on the downside greedy cat back exhaust TIC, and Tein suspension with exedy stage one)
http://i734.photobucket.com/albums/w...0-Exposure.jpg
That's just about everything you need, except of course Kpro, which is already behind my glove box, some heat wrap, vac hose, and I got some chrome zips for the heat wrap etc. Oh and I will also be going to ACE to get my zinc metric bolts as apposed to what comes with the kit. I am hoping to prep and start the build tomorrow, wish me luck, I am hoping to be diligent enough to take pictures of everything, and especially the things I had a lot of questions about, being a newb and all. If I am missing something to start please to all you OG's let me know, hopefully this will be as helpful as AKEP's and Newbrazza's post were to me.