errrrrrrorrrrr

i keep getting these errors...

• Engine Control Module (ECM) / Powertrain Control Module (PCM) Internal Circuit Malfunction
  
• Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage

i moved the spark plug ground to the valve cover bolt (like in the hondata directions)

any help...???

You have a faulty ECU probably

I called hondata n the Guy said it was my battery being low cuz my car sat for a while... but ur saying they ecu is no good???

Quote:

---

Originally Posted by talonXracer

You have a faulty ECU probably

---

What is the exact DTC you're getting? If it's a P1607, sorry to say, but the ECU is screwed. Been there, done that. I doubt a low battery would cause that DTC - what are your battery and alternator voltages?

I'm getting both of these error codes... by being screwed you mean it cannot be repaired? Or it will cost a lot to repair? Its not worth repairing? Etc... what was ur situation/ what happened with your ecu?

Quote:

---

Originally Posted by eP3RoyaLTy

I'm getting both of these error codes... by being screwed you mean it cannot be repaired? Or it will cost a lot to repair? Its not worth repairing? Etc... what was ur situation/ what happened with your ecu?

---

I saw the descriptions you posted in your first post. It's helpful if you can post the exact error code that you are getting - it will be something like "P1607". Not all OBD2 readers will give you the correct manufacturer-specific descriptions for DTCs.

I had purchased an OEM ECU off eBay to replace my Kpro'd ECU. Had the OEM one synchronized with the immobilizer at a dealership, but it threw a P1607, which indicates an internal ECU error. I'm not sure if it is repairable, but honestly it's probably not worth it anyway - a used ECU is $150-200. I ended up getting another (working) OEM ECU when I sold Kpro to another member here.

P1607
P0107

Are the two codes I'm throwing...

Get yourself a battery charger or jumper box. If that doesn't solve the problem, check your alternator, replace the map sensor ($40.00 at autozone), if theses things in that order don't work, you might need to try a new ECU. Do you have Kpro? or is it a stock OEM ECU.

Ill try that thanks... I do have Kpro n its throwing those codes...

LOL...

I was loading the wrong map... I was using the k20a2 maps... load the high octane k20a3 map n no more codes...

Quote:

---

Originally Posted by talonXracer

You have a faulty ECU probably

---

agree with him

Quote:

---

Originally Posted by eP3RoyaLTy

LOL...

I was loading the wrong map... I was using the k20a2 maps... load the high octane k20a3 map n no more codes...

---

Wrong map (k20a2) = error codes

Right map (k20a3) = ecu is fine / no error codes