CXRacing Vertical Flow Installed!
Well guys i finally got around to mocking up my CXRacing IC0012-A intercooler the other night with a buddy, and ive got to say, for 200$.. damn good. It isnt 100% complete we ran into some problems routing the piping because i want to keep my bumper support and i didnt get aluminum 90's with enough of an arc, the bend was to wide a tighter radius would have made installing it so much easier. But i removed my old beat up greddy unit and replaced it with this, and even though its just mocked up and we ran out of t-bolts so we had to use hose clamps so i could limp it home, i decided to try it out and give it a full throttle sprint, and im hitting about 2 psi more. i was just about hitting 10psi on the gauge now its running right up to 12, and a lot more responsive too. I dont know how that happened, but it did it consistently (not doing it anymore until my retune:() and never creeped or feel off. So im guessing mucho efficient! But anyway here are some pics:
http://sphotos-b.xx.fbcdn.net/hphoto...26519497_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...76215690_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...54140797_o.jpg
^the core's level wasnt set yet thats why it looks off
and...
http://sphotos-b.xx.fbcdn.net/hphoto...83270602_o.jpg
Please excuse the shitty pics i will get better ones, only thing i DIDNT like was how the lack of end tanks showed my condensor and white rad support, but nothing a little time, tape, and black krylon wont fix