-
Keyless problems
Hello everyone Noob checking in.....
I have a issue with keyless entry.. when I got my used Ep it came with a factory Honda fob.... So I though everything was great.
while tracing wires under the dash I found an aftermarket alarms type system... So I trace lots of wires going into this black box(aftermarket control unit) . Now that I don't have the black box my keyless doesn't lock or unlock doors. When I click the fob lock unlock button the head lights flash, but nothing happens with door locks. Can anyone please send me a picture of the LOCATION of the Factory Security module. I believe mine was removed to install aftermarket alarm. P.S. I have a large green plug under my drivers side dash panel which I think gets plug into module I'm missing. Any help with a picture location would be greatly appreciated.....
-
When you press lock/unlock does it work on the rear hatch door ? If that's the case then the problem might lie with the door actuators.
-
Nothing happened besides the headlights flashing.... And I just cant believe that all three actuators would go out at the same time... When the aftermarket box was in I could lock the doors with the fob, but had to unlock the doors with the key, which was the whole reason I started digging into the dash. Now that I've removed the aftermarket black box nothing works.
I hit the fob lock or unlock the head lights flash but nothing happens at the doors..... When I use the key in the doors I.E. drivers door turn it once drivers door unlocks, turn again and all three doors unlock... which I want to say actuators are working.... I'm stumped
-
I'm not sure how much help this will be but here is the electrical schematic and photo of the location of the keyless receiver. The connector is a 5 pin connector with 4 wires running to it.
http://uploads.tapatalk-cdn.com/2016...1f5c2e208c.jpg
http://uploads.tapatalk-cdn.com/2016...8572caa54f.jpg
Sent from my iPhone using Tapatalk