JDM EP3R Service Manual

Printable View

07-31-2012, 07:53 PM
usedep3

JDM EP3R Service Manual

I'm trying to make a DIY for JDM EP3R power folding mirrors

Anyone have a copy of the JDM EP3R Service Manual?

I'm looking for something similar to a helms manual.

I need the electrical/circuit diagram for the power folding mirrors.

Let me know if you have any leads on getting a copy of it. Thanks guys!
08-01-2012, 05:21 AM
usedep3

bump!
08-01-2012, 06:49 AM
Kerby

Did you see this thread?

http://www.ephatch.com/forum/showthr...Type-R-mirrors
08-01-2012, 07:51 AM
usedep3

Quote:

Originally Posted by Kerby

Did you see this thread?

http://www.ephatch.com/forum/showthr...Type-R-mirrors

Yea, I did. That link is a DIY for adding UKDM facelift 'blinker' mirrors onto a USDM ep3. It taps directly into the stalk and doesnt utilize the heated mirror function.

I'm trying to wire up the power folding option found on the jdm ep3r. I haven't been able to source a jdm ep3r specific power folding mirror switch, but I did find one that might be compatible. I need the wiring diagram to figure out which wire is which.

I have found plenty of threads where owners for the switch to work via a relay chain, but I want to be able to use an oem ep3r switch. I think I figured out the part number but I haven't been able to confirm it.
08-01-2012, 09:00 AM
DA9_GSR

Is this what you're looking for? ;)

The part number for the JDM EP3R folding mirror switch is:

- 35190-S7A-J11ZB

http://justmycar.moxiereporting.com/.../22-144a25.gif
08-01-2012, 09:15 AM
DA9_GSR

I too am slowly putting together JDM EP3R folding mirrors. I acutally plan on removing the entire harness and rewire it like OEM. All the wiring for the mirror movement is identical from USDM to JDM. Being a canadian SiR, I have power heater mirrors. So I will be able to used some wires that are already there. I only have to add two more. You americans have it a little less easy. You'll have to add quite a bit more to make it work.
08-01-2012, 09:27 AM
usedep3

Quote:

Originally Posted by DA9_GSR

Is this what you're looking for? ;)

The part number for the JDM EP3R folding mirror switch is:

- 35190-S7A-J11ZB

http://justmycar.moxiereporting.com/.../22-144a25.gif

Quote:

Originally Posted by DA9_GSR

I too am slowly putting together JDM EP3R folding mirrors. I acutally plan on removing the entire harness and rewire it like OEM. All the wiring for the mirror movement is identical from USDM to JDM. Being a canadian SiR, I have power heater mirrors. So I will be able to used some wires that are already there. I only have to add two more. You americans have it a little less easy. You'll have to add quite a bit more to make it work.

Thank you sir!

Have you been able to source the switch?
08-01-2012, 10:14 AM
DA9_GSR

Quote:

Originally Posted by usedep3

Thank you sir!

Have you been able to source the switch?

The switch is the last thing I'm looking for. I've tested my EP3R folding mirrors and they work properly. I just need that switch and the wiring begins.
08-01-2012, 12:09 PM
usedep3

Quote:

Originally Posted by DA9_GSR

The switch is the last thing I'm looking for. I've tested my EP3R folding mirrors and they work properly. I just need that switch and the wiring begins.

I'll let you know when I track one down.

I have a switch but it's for an EK9. The switch has a built-in relay, which is similar to the 35190-S7A-J11ZB but would require a rewire. If I can track down a switch, I'll let you know

any chance you have the wiring schematics for the EK9 mirrors? lol