Any turbo kit will work fine with or without a catalytic converter. You will ultimately make more power without a cat but a good quality high flow unit will only marginally decrease power over not having one at all.
Printable View
Any turbo kit will work fine with or without a catalytic converter. You will ultimately make more power without a cat but a good quality high flow unit will only marginally decrease power over not having one at all.
Problem seems to be that with the EP, if you install a high flow cat, you throw a CEL just like when you run a test pipe... So you also need something to override the O2 sensors as well...
Eric
You just need a rear 02 simulator. That's standard on most OBDII cars.
where can i get an 02 simulator for the ep??
caspers electronics (link)Quote:
Originally posted by Ep3_kid
where can i get an 02 simulator for the ep??
Also you can get some actually feedback here...Quote:
http://forums.clubrsx.com/showthread.php?t=111333
Worth reading, through the beginning pages it is mostly positive. Then near the end it gets pretty negative. Oh well, last pages hint to clear skies yet agian.
shouldnt there be an update..cybernation stage I 279.5 whp.
Quote:
Originally posted by SychoSly
shouldnt there be an update..cybernation stage I 279.5 whp.
We are currently in the process of polishing up our cruising and idle routines so there has not been much to report. Once we are finished with that, back on the dyno it will go and we will really see what we can get out of it. Will keep everyone posted.
any kind of restrictions will deminish hp ive got the rev hard kit its pretty meaty i took an sti in it pulled on his ass hard
The rev hard web site advertises +75 hp, 215 tq, so shouldn't the numbers be more like 200 whp and 215 lb-ft torque?Quote:
Originally posted by CIVICBOOST
Rev Hard Stage 2:
254 whp and 288 lbs/ft of Torque
7 PSI
Hondata FI flash included $3400
pending CARB approval
Actually, I just looked at the dyno on the web page and it says 252.7/228.6. So I guess it was a typo. Hehe, I wish I could get 288 lb-ft out of my 2.0L :)
whats with the ei piggyback from cybernation?
is the revhard turbo kit stage 2 street legal
Im running the greddy kit w/frontmount on my ep with a k24a1 and made 238whp and 237wtq at 8.5 psi. People say my numbers are low for my set up but i did not want all top end, I wanted good low/mid range power and the greddy kit gives me that. I can crank the boost up and push 300 but that's for later.
define legal:whistle: