http://www.ephatch.com/forum/showthread.php?t=42433
Printable View
my fingertips basically came off after rubbing all the glue off.
it was worth it in the end though
i used a heat gun, then some goo gone. washed clean and then waxed the area. worked perfect.
I used a heat gun to pull off the sticker, and then left the goo on for about a week. This made it much more difficult to remove.
I'm sure some are going to cringe at the thought, but I used brake cleaner and a super soft rag to get the adhesive off. I was real quick with the brake cleaner, and it evaporates fast, causing absolutely no damage to the clear coat.
Took 5 minutes with brake cleaner :)
goo gone ftw!!!!
I didn't have a hair dryer so I actually used my spot light.
mine was no problem at all..
GA heat = a hairdryer I guess
my stickers were horrible they would not come off they were old or something took a few hours and throbing fingers to get them off even with a heat gun they came apart in tiny peices.
Best thing i ever bought was a pin stripe removal tool!
It will take any adhesive or sticker off without disturbing the panel!!!