Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
poeticfinesse21
All 02-04 RSX-S are the same and yes you will need the RSX-S calipers. The rotors are bigger so the EP3 calipers will not fit plus reusing your EP3 calipers kind of defeats the whole purpose of doing the conversion.
Yes and No!
You can use the ep3 calipers in the rear! The front you need the Type S Calipers! And axles as well from a type S!
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
Thanks guys.
Yup anytime, Let us know if you need any help at all. You can pm me or email,
SkareKrowZ@gmail.com
:mwink:
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
Very help guys and thanks.
SkareKrow good looking out I just pulled a full setup off a 04 TYPE-S just know boy I'm tired and hurting. I'll do the swap in a few weeks I'm impressed with this site you've all been so helpful.
let me know if you need anymore help. if you were local we could do your conversion asap!=)
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
I have 1 more question I noticed the rear ABS senors are no good so I need to get these asap.
After looking at honda/acura part numbers it looks like the 02-03 EP3 shares the same rear ABS sensors as 02-04 RSX Type-S
So just to confirm I can reuse the EP3 rear sensors on the RSX knuckles which will avoid lights on the dash for abs and work out?
Thanks in advance.
you can reuse the ep3 ones just fine!
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
Are new Type S ball joints needed for this swap or can I reuse the ones since they look fine?
I would Just reuse... If they are fine..
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
obsoletearturo
Yeah those look like they will work as long as you have the rest of the stuff as well. I've never seen that brand.
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
obsoletearturo
okay so i know someone selling their type s 5 lug conversion with everything (about 54k on it)for about $450 with sensor and brake line, i was gonna just pick up a stainless steel brake line separate or should i just go with the type s brake line? Or should i buy the conversion off somewhere else? i need your opinion.
Wherever you would like to pick it up its pretty much where you can find a good price and thats in good condition.
For brake lines its up to you what you want to use.
Sent from my SPH-L710 using Tapatalk 2
DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
http://img.tapatalk.com/d/14/04/08/u5usyse3.jpg
I did what i said i was gonna do and it all went great! But! another thing i noticed is i hear a very slight rumbling noise when i drive... It dosnt seem too major. You think the bearings just need a greasing? And if so how do i do that? Lmfao