All done rebuilding it and its back in! ill plug everything up tomorrow and see if it wants to play nice and start lol.
Printable View
All done rebuilding it and its back in! ill plug everything up tomorrow and see if it wants to play nice and start lol.
I replaced brake pads front and rear. Adjusted my coilovers, raised half inch so jack slides under car now. Washed suspension. Found broken endlink. Paid honda to replace both endlinks had to be cut off. Got oil change. Replaced air freshener hanging from seat belt anchor .
Today I replaced the radiator and hoses.
Replaced a burnt out dash bulb and pushed the bottom of the passenger door in a bit, it was out a bit and not sure why.
Used a orbiter buffer to thouroughly scrub the roof liner.
Ordered JDM/EDM parts
Headlines.
Carpet
Seats
Facelift Mirrors
Floor mats.
Removed rear seats
New Pioneer headunit
Replaced interior bulbs with LED
cleaned and scrubbed suspension/inside fenders/engine bay/everywhere!
battery
Yes, Shes getting some love for sure!
Where’d you order those things from?
Just bought one myself. So impatient I haven’t even posted any pics or intro yet [emoji23]https://uploads.tapatalk-cdn.com/201...b4e6f4be79.jpghttps://uploads.tapatalk-cdn.com/201...3778d36db2.jpghttps://uploads.tapatalk-cdn.com/201...512a9074e5.jpghttps://uploads.tapatalk-cdn.com/201...6f22e68093.jpg
Sent from my iPhone using Tapatalk
^^ and it’s an ‘04.... I’ve owned a silver 04 in 2005, an ‘03 in blue, 2x ‘02’s and now finally a blue ‘04.
https://uploads.tapatalk-cdn.com/201...c9bc243b0b.jpghttps://uploads.tapatalk-cdn.com/201...bb16eac25d.jpg
Sent from my iPhone using Tapatalk
Car has been sitting for 2 years. Brake line rusted out. Cut out rusted out section and replaced. Bled brakes after.
Cleaned my engine bay Attachment 7199
Mine's my daily, so I started her up, released the parking brake, rolled over the 2 x 6 plank that I use as a fail safe (driveway's on a hill, so sometimes the car has moved half a meter overnight), and backed out into the street, holding on to the passenger's side seatback "oculus" to stretch my 70-year-old neck around and check for traffic. But, first, I measured to see if an 8-foot milled wooden molding would fit. No problem!
half a meter is fully in "holy crap, that's pretty terrifying" parameters!
Cut out rust in the driver rear fender, built a Carbon Fiber "overfender", adhered to car and now seam sealing with Carbon Fiber mesh and POR15.