yeah anyone please post pics of their depo projectors shining to the wall
yeah anyone please post pics of their depo projectors shining to the wall
[QUOTE=Distance;860482]you have to adjust them. mine was the same way.
how did u adjust them? wont they be aimed too low if u just use the aming srews or did u modify them?
Ill take the wall shot tonight, but my lights adjusted very easily using the screws, if yours dont then either your housings are defective or your car has been damaged. mine came with the harness to plug right into my 03 si. these lights could fit a little better, but they work pretty good. i used the best sylvania bulbs i could get and they work awesome.
does any of your depos leak? after car wash mine seems to get lil bit foggy inside.
my passenger side one does, i'm not sure if its the headlight its self or one of the turn signal bulb seals. if i remember correctly they didnt fit the headlight so well.
does your fog just go away by itself?Quote:
Originally Posted by apexracing
yeah my turn signal sockets don't fit well
yea for the post part. i have a little condensation on the lower part of the lens towards the large turn signal bulb on a cold wet morning. but after mid day its gone, or if i wash it the passenger side gets pretty cloudy.
Are these compatible with xenon HID's? Are the fronts glass or plastic?
they are plastic, the stock headlights are plastic as well. these projectors are made for an h1 bulb. i believe hid's would look shitty without a retro fit.
That sucks. I wonder can I change out the bulb and still use my hids.Quote:
Originally Posted by apexracing
I was thinkin bout getting the depo from eBay since its like $50 cheaper than showstoppersusa.
Without making disparaging comments about a site vendor who I completely respect, buying your Depos from eBay is a totally viable option. I've ordered 2 sets that shipped quickly and with no issues whatsoever from eBay (188.00 plus shipping was just unbeatable from any shop).
As far as HID's "sucking," it's all relative. These will perform more properly than a PnP HID kit shoved into a non-projector halogen lamp (i.e. 02-03 stock housing) because they actually direct light forward (with projectors). Will they have beautiful cutoffs and great light projection? No, you get what you pay for. But plenty of site members have thrown PnP HID kits into these Depos for prices FAR BELOW the price of a pair of CTR lights or a TSX retrofit and enjoyed the results. In the end, it depends on what you want to get out of your lights and what you're willing to pay.
TL,DNR: ebay works fine and these lamps pair decently with PnP HID kits
Anyone running halogens with the Depo's?
If so, did it do a decent job lighting up the road? I don't wanna be the douche bag that blinds everyone with HID's
And one more question
http://a5.sphotos.ak.fbcdn.net/hphot..._1144439_n.jpg
this is the turn signal socket that came with the depos, do I still need to splice anything or can i just unplug the old one and install the new one?
Let me know thanks cause it will determine if I'm gonna do the install this weekend :)
Nope should be plug and play. Mine plugged right in.Quote:
Originally Posted by Type_R_Nammer
[QUOTE=jeenyusss;868594]it was 400 for everything - headlights/harness/bulbs/turnsocket mod
I see 4 options on the ssr. "the turnsocket mod", is that included with the options or did you have to add it seperatly ?
Keep us updated on the install and performance of these lights.