It seems info for lip install was deleted anyone have partnumber info for the clips that install the rear lip to the bumper? also there seems to be some kind of clip/nut that needs to go in there to fasten the lip to the bumper.
Printable View
It seems info for lip install was deleted anyone have partnumber info for the clips that install the rear lip to the bumper? also there seems to be some kind of clip/nut that needs to go in there to fasten the lip to the bumper.
I had all the part #'s saved in my pm's:boom:
i need that info too please pm me if anyone finds it!!
So I got a quote from the UK the way it looks I need 32 and 35. IDK there is more to it than this quote shows there is like 2 more places on each end where it looks like there is a connection.
Yeah, that was my thread with all the part numbers.
You are correct, will need 4 each of #s 32 and 35, these are the only ones that need to be sourced from Japan or UK. Also will Need:
# --- part number ----- desc ---- qty
31 -- 90126-SA7-000 -- screw -- 2
38 -- 90345-S04-000 -- clipnut -- 2
36 -- 90305-SH3-000 -- clipnut -- 2
39 -- 90501-SM4-003 -- bolt ---- 2
All available from US Honda. Everything else will reuse your factory parts.
great, thanks for the info!
if you want to know what I did on mine, i used the same screws for the lip that they use on the mudflaps, and there should be atleast one back there, i used the pop in clips that you would use in the fender liner for the 2 underneath, and i used the pop in clips that came with my type r side skirts and i pushed them through the holes in the bumper, then pulled the teeth out...it made it so they pulled the lip on very tight, i highly suggest this...
Does the Lip not come with the clips already?
SHIT....
mine didnt...but if you order sideskirt clips from honda you can use those...
lookup the 04/05 usdm sideskirts and buy the little clips...i cant remember how many you need on the rear bumper, but i cant imagine it would be more than 6...so just order 6 or 8, leftovers are extras you can use if you ever need to remove the lip...
basicly there are little slots on the lip for the slide in clips, there are holes on the bumper, you push the clips through and pull the tabs out to make sure they hold securely...buy the clips, buy the bumper, buy the lip, and when you have them all infront of you and look you will know EXACTLY what i mean...
yah no problem, they hold the lip on really tight...also make sure you have enough screws for the ends of the lip to the ends of the bumper in hte fenderwell, so you will want to order those too...i say unwrap them and peek...or pull up my members ride and you might be able to see, i think i have 2 on each side though...
i called my Honda Dealer and they said the part number was 91503-SZ3-003, but im not 100% that is the right one, i just want to make sure before i buy 8 of em
ill look it up right now!!!
(edit)
ok...this is what i found
http://www.hondaautomotiveparts.com/...S5S0_B4210.gif
im not sure if its 31 or not...32 looks like a sticky clip that honda sells but i really cant tell, and what makes me nervous about 31 is that on the ctr sideskirts for example, they use all of one type of pop in clip (which are the ones i used on the bumper) but there is 1 smaller pop in clip that goes on the "fin" of the skirt...so i dont know, though if i had to guess it is 31...
if the clip is white, then its the right clip, if its black then its the smaller one, i know that much...
sorry thats all i can come up with right now while at work...
(edit2)
i just noticed that honda lists the 31 as 18 required, which tells me they are correct, sorry they dont list a part number on the website, so i dont know how to check, but that is the same diagram that the honda dealer will have on the 04 si...
so 31 is correct...haha...after thinking about it, i think you only need 4, so if you buy 8 that means that if you ever have to pull the lip again you can replace the clips to ensure they dont fail at a later time, since you have to pull the tabs on teh clips outward after you push them through (again they werent designed for this purpose but they work exceptionally well)
DOPE!
ill just bring the diagram in and see someone in the parts department and tell them what part i need, lol... im also going to order the ctr sideskirts and if those dont come with clips would i be able to use these same ones or is it different?
thanks for your help dude
god i wish i had pictures from my install...as for the CTR skirts, if you have an 04/05 you will be able to use the exact same clips, if you are getting the ctr skirts new then they will come with the clips, the only thing will be that you wont have the holes drilled on the quarter panel for the clips, so you can either drill holes yourself, OR honda sells sticky clips which slide into the slots for the clips on the sideskirts...and that little problem spot with no drill holes is only on the 3 or 4 clips on the "fin" of the skirt...
NOW, if you have the 02/03 ep, then you need to either drill for every clip, which i highly discourage because the chance you'll screw up is almost certain without a template...NOW the option for the 02/03 skirts is using the sticky clips i mentioned above, which are available from honda america...
i used sticky clips since i have an 02 and htey are HOLDING UP GREAT...
something else i suggest is using the underbody clips available from www.japanparts.com
there are 2 per side, they use 2 screws nad 1 snap in clip, they are some added support and safety to hold the skirt in place...there is a spot to drill on each skirt to add a 3rd underbody clip, i did this and i highly suggest it...
yeah i have an 02 EP3, i think i'll just get the sticky clips for it!
thanks again mang
hey no problem at all man, just pm me with any type r body part questions and ill help you out...if you could do me a huge favor though, take pictures of your side skirts and rear bumper/lip install before, during and after...cuz id like to get pics together for a DIY...if you are doing the front bumper id love that too...thanks man!!
http://i252.photobucket.com/albums/h...yperbumper.gif
http://i252.photobucket.com/albums/h...eskirtpics.gif
http://i252.photobucket.com/albums/h...yperdecals.gif
http://i252.photobucket.com/albums/h...rontbumper.gif
I found this type R manual thing that I downloaded its got a ton of info in it check it out
dont have a torrent program here at work (and would prefer not to), if someone can give me part numbers for these screws I will love you forever (no homo)- 02-03 jdm front lip to bumper screws
http://i252.photobucket.com/albums/h...rontbumper.gif
thats not correct though on the rear lip...there is nothing to screw into back there, just some slotted clip slots like on the side skirts...thats how you get it from honda, unless they sell little slide in clips in japan that have threaded holes for bolts, but from honda japan the lip comes with no clips in the slots...soooo.....yah...heads up, my method might be better and cheaper, unless you want to call japanparts and track down the slot in screw holes and bolts but...thatll be more expensive
though ill admit that if i had known about ^^^THAT^^^ i would have ordered the parts to do that...
Yea the picture seems to be missing those clips that the screw goes into. the partnumbers should be on this one. I should have the rest of the partnumbers for the front later today.
http://i252.photobucket.com/albums/h...pernumbers.jpg
http://i252.photobucket.com/albums/h...rearbumper.jpg
Yea the bottom one is the type r lip I am not sure what the other piece is above it, Hfp lip?? any one else got a quess?
best info ever
:peace:
when i do the jdm look ill be sure to reference this!
yea it is that #3 that I wasn't sure about but valence would make sense.
So does anyone have the part numbers for the front lip. 5,6,11 and 12 and screw #48
http://i252.photobucket.com/albums/h...pernumbers.jpg
http://i252.photobucket.com/albums/h...eskirtpics.gif
Here is the partnumbers for the side skirt installation
letter B screw,2 you reuse those from the wheel well
letter D is 91503-SZ3-003 can be bought from the states and are also used on the top and bottom of the front bumper and the bottom of the rear bumper.
Letter E is the Japan version for the 02 si you need the sticky tape version so you don't have to drill holes you just clip it in and it sticks to car they work real well Most people skip everyother cause they are are a little spendy for 20 plus of these! I think these can still be bought in the states last I heard they were back ordered.
is called clip,side sill GA
91513-S5S-E01
Letter F is japan version for the 02 si you just use double sticky tape clean the area real good and use a good 3m tape.
Letter G is the screw that holds the bracket H on the skirt you need 4 per side so 8 per car I think these need to be ordered from uk or japan.
90104-SR2-003
Letter H is the underbracket 2 per side 4 per car clip D goes though the hole at the top into the car body underneath. I think these need to be ordered from uk or japan.
71804-S5A-R00
i should mention that you can get all the underbody clips and such from japanparts.com i had them add them to the list of parts on their ep3 page...
You got any partnumbers on the front spoiler bolts and spacers?
if you are talking about the bolts that hold the front lip onto the front bumper, i do not have those, i didnt run them, i just screwed the ends of the lip on, the damn thing stays on by itself pretty much...if you want to order them, email japanparts.com and they will give you a diagram and ask which numbers it is, you can tell them which it is, and then they will add them to the list of parts on the site and you can order them...i highly suggest that...then you can just direct people there to buy them
email sent will see what comes back! thanks
no problem, just remember they are in japan, so you will get a response at a weird time, and give them a few days to get back to you...they get a lot of emails, but htey are really cool and really helpful...i like doing business with them...plus they are very respectful and polite and i like that in this industry...too many distributors are too informal...
Ok thanks I edited it letter H "Underbracket" needs to be bought in Japan or UK right?