Installing a shift knob...
Hey, wazzup? I'm kinda new here and wanted to know the best way to remove the shift knob. I've haven't really gotten to do my projects yet and I wouldn't mind someone telling me the easiest way to do this. I know it's just twisting off the shift knob but is it just that or is there a technique without using tools/pliers?
Thanks
Re: NOOOOOOOOOOOOOOOOOOOOOO
Quote:
Originally posted by sniperSI
The shift knob , that silver ring, below the black know, well there are clips holding that know into that silver Ring..
You must stick a small screw driver, flat head (if memory servers,) and release the clip in the front (top) of the knob and bottem pop that clip, ... or are they on the side?
Ok my tecxh advice sucks, but first u msut release that silver o ring from the knob, then twist away,
I installed a pretty phat razo shift knob and used a tool to shave down the inside of the silver o ring to make it slide in perfect, looks phat.
I'll try to post pics.
no you don't have to use a damn screw driver....just hold onto the silver thing and turn. It comes right off. you'll break the plastic tabs if you do that.
now it depends on the shift knob you get, but most likey you will have to get a washer that is about 1/4" think to keep the silver tab up to it won't look rediculous. I'll post some pics of mine in a minute. I keep saying I will, nows the time I guess.