Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
poeticfinesse21
All 02-04 RSX-S are the same and yes you will need the RSX-S calipers. The rotors are bigger so the EP3 calipers will not fit plus reusing your EP3 calipers kind of defeats the whole purpose of doing the conversion.
Yes and No!
You can use the ep3 calipers in the rear! The front you need the Type S Calipers! And axles as well from a type S!
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
Thanks guys.
Yup anytime, Let us know if you need any help at all. You can pm me or email,
SkareKrowZ@gmail.com
:mwink:
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
Very help guys and thanks.
SkareKrow good looking out I just pulled a full setup off a 04 TYPE-S just know boy I'm tired and hurting. I'll do the swap in a few weeks I'm impressed with this site you've all been so helpful.
let me know if you need anymore help. if you were local we could do your conversion asap!=)
Sent from my SPH-L710 using Tapatalk 2
Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts
Quote:
Originally Posted by
dreman
I have 1 more question I noticed the rear ABS senors are no good so I need to get these asap.
After looking at honda/acura part numbers it looks like the 02-03 EP3 shares the same rear ABS sensors as 02-04 RSX Type-S
So just to confirm I can reuse the EP3 rear sensors on the RSX knuckles which will avoid lights on the dash for abs and work out?
Thanks in advance.
you can reuse the ep3 ones just fine!
Sent from my SPH-L710 using Tapatalk 2