MercRacing MR900 Supercharger Kit in the k24a2 ep3
*First off, Thanks-A-Million for the meticulous build Jose Mercado. Hats off to you sir...
MercRacing MR900 Supercharger Kit utilizes EATON’s latest 6th Generation supercharger. These Twin Vortices Series(TVS) Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in a patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors.
*An RDX crank pulley(6.37") and a 2.80" Blower Pulley are in place and dyno tuning will be done shortly after install.
*The tuner installed a 50* VTC Gear, a Z3 Upper Chain Guide, and an Inline Pro Timing Chain Tensioner before tuning.
*FUELING - DeatschWerks 1000cc Fuel Injectors(17U-08-1000-4)
and DeatschWerks DW65c fuel pump(9-651-1009)
http://mercracing.net/wp-content/upl...33-600x436.jpg
This MercRacing K-Series adjustable belt auto tensioner is a strong, solid and serviceable solution to your supercharger belt wrap, belt adjustment and tensioner needs. No belt slip for me.
http://mercracing.net/wp-content/upl...80-600x450.jpg
A Garrett Front Mount Intercooler is piped into the manifold.
http://www.atpturbo.com/mm5/graphics...INT-001450.jpg
Custom Piping done by Jose Mercado using A Large Universal Aluminum Pipe Kit, 2.5"
http://www.frozenboost.com/images/pr...it_picture.jpg
An Artec Industries Battery Boxes OP5101 for group 51 battery(stock size battery) was used to relocate the battery under the passenger side head light.
https://static.summitracing.com/glob...-op5101_ml.jpg
These American Autowire external battery jumper blocks are used in case a jump start is needed without having to remove the front bumper.
https://static.summitracing.com/glob...-500931_ml.jpg
These Painless Performance alternator wiring kits are used for wiring it all up.
https://static.summitracing.com/glob...f-30700_ml.jpg
Good instructions for wiring and battery relocate here: https://www.kseriesparts.com/instruc...elocatekit.pdf
Modification to the Garrett FMIC:
https://scontent-atl3-1.xx.fbcdn.net...1e&oe=5ADB9153
https://scontent-atl3-1.xx.fbcdn.net...e3&oe=5B25ECAE
https://scontent-atl3-1.xx.fbcdn.net...0e&oe=5AE0CC27
https://scontent-atl3-1.xx.fbcdn.net...6a&oe=5AE301CE
SPAL Slim Fans(7.5" puller) were used in place of the OE fan, the OEM was too big to fit the intercooler piping. A repainted and cleaned up OEM condenser fan was used in this also. Thanks to my bud Sing for sending the cond. fan.
https://scontent-atl3-1.xx.fbcdn.net...13&oe=5AF7A51F
Custom Radiator brackets fabbed from original T-Bar.
https://scontent-atl3-1.xx.fbcdn.net...04&oe=5AF184F8
Battery bracket painted and placed under the passenger side head light.
https://scontent-atl3-1.xx.fbcdn.net...f5&oe=5AFAAE47
Lower Battery Bracket Fab:
https://scontent-atl3-1.xx.fbcdn.net...a2&oe=5AF7EE7B
Remote Jumper Terminals placed where the battery box used to be.
https://scontent-atl3-1.xx.fbcdn.net...10&oe=5AEB21FB
https://scontent-atl3-1.xx.fbcdn.net...8d&oe=5ADE241F
https://scontent-atl3-1.xx.fbcdn.net...96&oe=5AED5D2E
AEM V2 Intake cut where it's 3.5"
Now it's a custom made AEM V3.5
https://scontent-atl3-1.xx.fbcdn.net...f4&oe=5AE738AD
https://scontent-atl3-1.xx.fbcdn.net...e1&oe=5ADE7EB4
https://scontent-atl3-1.xx.fbcdn.net...ab&oe=5AE364C7
Koyo Radiator(V2574) installed but there was no room for the overflow so we made one out of spare parts in Jose's garage. Looks great and works perfectly with plenty of volume.
https://scontent-atl3-1.xx.fbcdn.net...d9&oe=5AEE6780
Stock rad cap won't fit so I got the Koyo rad cap
This is how it sits finished up and ready to rock!
https://scontent-atl3-1.xx.fbcdn.net...53&oe=5AF6A31A
Ortizcustompods gauge pod and 14point7 Gauges in the cockpit.
https://scontent-atl3-1.xx.fbcdn.net...6e&oe=5ADF9907
All washed up and ready to roll out.
https://scontent-atl3-1.xx.fbcdn.net...db&oe=5AEBDF7D
Thanks again MercRacing