Dumb Question Thread (use this instead of making new threads)

Printable View

Show 40 post(s) from this thread on one page

02-23-2011, 10:26 AM
DRP967

Quote:

Originally Posted by Hasbro

Hmmm, I would think that the rebar is an integral contributor to the structural rigidity of the chassis.

Quote:

Originally Posted by RedSiBaron

Hahahahaha if you could run the usdm id of expected him to you know, just leave it when he put the bumper on...

Yeah I agree but its temporary, it will go on eventually he/she says.

Yes
02-23-2011, 10:28 AM
DRP967

Quote:

Originally Posted by PatrickJamesYu

Thought I'd post here incase I get flamed for starting a new thread.
I'm confused as to knowing where to cut into the plastic to install my C-Pillar bar
Also, is there an existing place under the plastic that is there for me to bolt it to?
Like a bolt or nut that is there?

Thanks guys!

There was a template around somewhere a while back...just print it out if you can find it lol search or something and place it on the pillar cover thingies/trace/then cut. Anyways I would take the covers off and just see where the bolt area is in relation to the cover...from there cut a clean square/circle. And yes there is a spot to mount the bar once you remove the plastic...its the seat belt bolts. Someone correct me if I am mistaken. Good luck and bump for more help if you need it.
02-23-2011, 10:30 AM
ShadowEP3

why do fools fall in love?

also: should i change my username?..who wants to pick it?
02-23-2011, 10:40 AM
Passenger

Quote:

Originally Posted by ShadowEP3

why do fools fall in love?

also: should i change my username?..who wants to pick it?

change it to Driver
02-23-2011, 10:50 AM
usedep3

Quote:

Originally Posted by ShadowEP3

why do fools fall in love?

also: should i change my username?..who wants to pick it?

i want to change mine too. can i haz 'ShadowEP3'? its so mysterious

they fall in love bc they're fools
02-23-2011, 02:50 PM
PatrickJamesYu

tell me why my cars front suspension creaks?
I had skunk2 springs, I just swapped to ground control sleeves.
I greased the top hats and the creaking's still there.

And if there is a link, post?
Thanks
02-23-2011, 03:29 PM
codyep3

will I need to do anything extra with 16x7 rims 43 offset, 205x50x16 if i drop my car on Progress springs? (1.8 drop front 1.5 rear)?
02-23-2011, 03:31 PM
codyep3

Quote:

Originally Posted by sleepy ep3

Why do hot dog buns come in counts of 8 and hot dogs come in counts of ten?

this? lol!
02-23-2011, 03:46 PM
sleepy ep3

Quote:

Originally Posted by PatrickJamesYu

tell me why my cars front suspension creaks?
I had skunk2 springs, I just swapped to ground control sleeves.
I greased the top hats and the creaking's still there.

And if there is a link, post?
Thanks

It's because the spring doesn't have a turn-able base or top hat. Whenever you turn, the spring is having to turn with the suspension. It's hard to explain really. I had the same trouble on 2 suspensions before I went with Tein SS
02-23-2011, 03:49 PM
Lyndon

Quote:

Originally Posted by codyep3

will I need to do anything extra with 16x7 rims 43 offset, 205x50x16 if i drop my car on Progress springs? (1.8 drop front 1.5 rear)?

doubt it. that's almost stock offset, and when i had 205x55x16 on oem wheels, i had a bit of space between the tire and fenders all around.
I was on skunk2 springs though, so i'm not sure how that compares to progress springs
02-23-2011, 03:50 PM
sleepy ep3

Quote:

Originally Posted by ShadowEP3

why do fools fall in love?

also: should i change my username?..who wants to pick it?

You should go with
(my top 5)
Barf Licker
Turb burgerler
Shaggcarpet
Motor-bbbbboatin
Or else.

Or you could always go with some lame, unimaginative vtec reference like everyone likes to do.
02-23-2011, 06:52 PM
Type_R_Nammer

What is the bulb size that goes behind the climate control?

One of them burnt out :(
02-23-2011, 09:54 PM
codyep3

Quote:

Originally Posted by Lyndon

doubt it. that's almost stock offset, and when i had 205x55x16 on oem wheels, i had a bit of space between the tire and fenders all around.
I was on skunk2 springs though, so i'm not sure how that compares to progress springs

i thought skunk2 springs were 2inch drop all around. I was 99.9% sure I would be fine, but I just wanted another oppinion
02-23-2011, 10:00 PM
RHCP0801

Quote:

Originally Posted by codyep3

will I need to do anything extra with 16x7 rims 43 offset, 205x50x16 if i drop my car on Progress springs? (1.8 drop front 1.5 rear)?

stock rims are 42 offset, you wont have any problem at all
02-23-2011, 10:01 PM
codyep3

when debadging the front SI emblem, do I just pull up the metal looking spikes? Or what?

Show 40 post(s) from this thread on one page