Some one have the DIY Laying around or something im doing some 04/05 type R headlights since my car was crashed into and yea i need the diagram
Someone PM me for Email :violin:
Printable View
Some one have the DIY Laying around or something im doing some 04/05 type R headlights since my car was crashed into and yea i need the diagram
Someone PM me for Email :violin:
Bump somebody get this man a diagram..so he can wire up his new harnesses and put on his new headlights
:bump:
Ocelaris makes badass harnesses... I hope he don't mind me posting his harness diy from a different location.
here is the diagram.
http://i126.photobucket.com/albums/p...HID-9005-P.jpg
I'm not sure if I can post this link here but one of the homies on this site makes badass harnesses for our cars. GL!
I dont trust other people with my Wiring... Sorry thats for that tho I just need the DIY Ima do it myself and improve on the Wiring Design....
For now ima do the halogens but ima do a whole HID DIY for this With Relays and all i just need to kno what i need to wire up for 04/05
instead of the ballast, just plug those into your lowbeam headlights. The halogens are not polarity specific so it'll work. GL!
Wait thats Ocelaris I remember him he's the dude that wrote up the convertion to begin with!!!!
I NEED HIS POST!!!!! DAMN YOU EPHATCH FOR CRASHING!!!!
Hey d3 can you edit that link to hidplanet out of your post. I tried to ninja delete but you were just too fast. LOL :mtongue:
Thx for the Diagram Im making a plan now...
I finished up the Driverside harness I think its a bit overkill but screw it Ima do a HID Plug and play kit for both lo and high so this harness should be perfect my setup...
It involves 4 relays and lots of wires Im tired I need 2 more relays cause i only bought two soooooo Lots more to do 2morrow yay! :violin:
hopefully the lights come in sometime early next week and i get my car back or maybe not but whatever
I need to remember to get connectors and relays tomorrow
Im running low...
Try this to convert your 02'-03' signals to the 04'-05' ones: http://www.ephatch.com/forum/showthread.php?t=43835
Well im actually shaving the sidemarkers on the bumpers you kno those amber ugly ones that dont flow with the car at all....
Sooooooo the harness for those lights are gonna be unused....
Im gonna cut the connectors off of those and use the connector for the marker lights on the new headlights.. they seem to be the same connector... sooo it should work just fine cut the old one off and put these in simple enough
and finally i did finish my 9005-9006 convertion harness... here are some pix
I simplified and used 2 relays 14 gauge wire and lots of time...
http://i58.photobucket.com/albums/g2.../IMAGE_052.jpg
http://i58.photobucket.com/albums/g2.../IMAGE_053.jpg
http://i58.photobucket.com/albums/g2.../IMAGE_054.jpg
The blue connector is the 9006
Black is 9005
2 ground straps for each head lamp
the fuse holder and H4 connector... turned out nice im happy...
Oh and i added some wire loom to keep that stock feel...
i'm glad you weren't stubborn. GJ!
if yours work, ill pay you for one. b/c i suxors at wiring..hahahaa
I think you gotta shave a little off of the male plug. You'll see when you do it. Its really easy.
http://img155.imageshack.us/img155/841/photos002zf6.jpg
http://img519.imageshack.us/img519/4...otos003jk0.jpg
http://img337.imageshack.us/img337/3...otos004ud2.jpg
http://img528.imageshack.us/img528/7...otos006fx0.jpg
http://img80.imageshack.us/img80/36/photos007wg0.jpg
http://img519.imageshack.us/img519/6...otos008vd0.jpg
this is the harness rallylights made me, can you take a look at it and let me know if everything is kosher, and what i have to do to use it?
thanks homies
any bah-D thur?
Ur getting Legit JDM's Aren't you?
Cause im getting the DEPO Reps and it seems that the 9006 - H1 Jumper connector is already on the assembly so all i did was a good old H4 - 9006 , 9005 harness
I'd be more comfortable if those 2 female connectors you have there where a 9006 connector then just use the prelude jumper.. ya kno
Bumping this thread for some info, plus it's chock full `o lighting knowledge, so figure it couldn't hurt. :mbiggrin:
I picked up a set of standard, USDM 04/05s recently to throw on my 03. I've been looking in to the wiring harness workups, and this thread obviously came up. Unfortunately, some of this stuff doesn't make sense to me (not much for wiring beyond basic electrical installs in the house :mtongue:), so I'm looking in to buying a harness instead. I've got a PM in to Wayne at SSR, and I was diggin around on SUVlights as well.
My first question is about the suvlights harnesses; has anyone used them, and which one [I]specifically[I] should I pick up for my needs? It looks like they sell one that's a 9005/9006, but does that plug straight in to the 02/03 harness (where applicable)?
Help me out here guys; I want some nicer lights, but obviously can't be bothered to figure it out on my own! :mangel:
nice info here...thanks!
Quick update, ordered a harness from www.suvlights.com/ after emailing back and forth with one of their guys. He recommended this harness, with a comment in the notes to the effect of "H4 to 9005/9006" so they'd know what it was for.
So when it and the lights come in (hopefully next week) I'll check it all out and report back.
Quick update, got the harness and parts in last week, and did the swap Friday afternoon. Everything went pretty well, got the job done (kind of) and the 04/05s are in.
Link for the harness I used: suvlights.com 114 harness
Like I said earlier, if you order that one and put "H4 to 9005/9006" in the notes when you order it, and it should work fine.
Now, like I said earlier, the job is kind of done. Turn signals. I knew that the 02/03 sockets wouldn't fit in the 04/05 housing, but I figured I'd give it a shot anyway, see if I couldn't shave `em down or something. Nope. Ordered the new sockets yesterday, hopefully they'll be here mid-week and I can get those in.
And I have a question on that end: the sockets are different, but are the plugs on the harness side different, too? I couldn't find an answer on that anywhere, so if someone knows fill me in. I assume if they're different, I'll need plugs w/pigtails so I can splice those in in place of the current plugs. Somebody LMK about that, so's I can order my parts LOL! My turns are stuck in w/electrical tape right now, all ghetto style!
EDIT:
So just went back through the thread, and found the link to modding the turn signals. Seems the connections on the harness side are different, but all the pics from the DIY thread are dead. Anyone got pics/info?
LINK: 04/05 Electrical Connections, Front
So, found that. Looks like it's probably part number 8, but there are two of those listed, and I would still need pigtails. Anyone know if that's right? Or, if not, which parts do I need? :shrug:
Sooo, no one has any more info on the turn signal conversion?
I got some depo projectors i will be puttin into my car here pretty soon this thread might actually help me out a bit with making the harness with a friend.
thanks a lot guys, since there isnt many threads on this issue.
ahh, i too am in search of the part number for the turn signal plug that inserts into the headlight.. (the piece that holds the bulb AND what plugs into it) then i assume i just splice into my current turn signal wiring to get it working. of course im sure this would all make more sense if i had it laying out in front of me, i havent started ordering parts just yet...