DIY: Depo Headlight Projectors 04-05. 56K dont approach!
I got some Depo Projectors from Moonsi here:
http://www.ephatch.com/forum/showthr...low-Fog-lights
Great purchase IMO. Great quality, fast shipping, and came with instructions.
Now if you have 02-03 then you dont need this thread. This is for the 04-05. Now Moonsi did provide me with some installation steps but I thought I'd make a thread for you guys that need more than paper.
http://i951.photobucket.com/albums/a...e/IMG_2254.jpg
http://i951.photobucket.com/albums/a...e/IMG_2255.jpg
http://i951.photobucket.com/albums/a...e/IMG_2256.jpg
First, take off your bumper! You'll have to take off your bumper clips, here:
http://i951.photobucket.com/albums/a...e/IMG_2156.jpg
A screw under the fender liner
http://i951.photobucket.com/albums/a...e/IMG_2266.jpg
Several screws under the bumper
http://i951.photobucket.com/albums/a...e/IMG_2267.jpg
And when you do that, just pop the bumper off. You dont have to necessarily take the whole bumper off. Mine was just on the floor, connected by my side bumper markers and my fogs.
http://i951.photobucket.com/albums/a...e/IMG_2268.jpg
Now lets take off those nasty OEM headlights! You'll need to remove the panel here by two honda clips. Pull up in the center, and remove the clips.
http://i951.photobucket.com/albums/a...e/IMG_2269.jpg
http://i951.photobucket.com/albums/a...e/IMG_2270.jpg
Remove the screw and 10mm bolt here
http://i951.photobucket.com/albums/a...e/IMG_2271.jpg
And under the headlight is another bolt
http://i951.photobucket.com/albums/a...e/IMG_2273.jpg
*****Now I dont know why but I forgot to take a picture of this. But theres another screw on the side. Remove also.
This part of the headlight gets bolted there.
http://i951.photobucket.com/albums/a...e/IMG_2284.jpg
After that, remove the bulbs. If you're like me, it took some work to unclip the wires, so I disconnected all the bulbs from the headlight first then removed the wires. Stupid 7 year dirt.
http://i951.photobucket.com/albums/a...e/IMG_2281.jpg
http://i951.photobucket.com/albums/a...e/IMG_2280.jpg
http://i951.photobucket.com/albums/a...e/IMG_2275.jpg
http://i951.photobucket.com/albums/a...e/IMG_2276.jpg
You're going to disconnect all bulbs except for the turn signal here.
http://i951.photobucket.com/albums/a...e/IMG_2279.jpg
http://i951.photobucket.com/albums/a...e/IMG_2277.jpg
Next get your DEPO headlight, flip it over and remove these two harnesses
http://i951.photobucket.com/albums/a...e/IMG_2257.jpg
http://i951.photobucket.com/albums/a...e/IMG_2259.jpg
http://i951.photobucket.com/albums/a...e/IMG_2260.jpg
http://i951.photobucket.com/albums/a...e/IMG_2261.jpg
http://i951.photobucket.com/albums/a...e/IMG_2262.jpg
Get your DEPO headlight and install! Now everything should wire correctly. The only trouble I had was that my city light wasnt long enough to stretch from my HIGH beam to my CITY light. So I had to cut the harness JUST A LITTLE BIT. I didnt cut any wires. Just the harness cover.
http://i951.photobucket.com/albums/a...e/IMG_2282.jpg
http://i951.photobucket.com/albums/a...e/IMG_2286.jpg
Then put the headlight on, bolt on all 4 bolts/screw. Put back everything the way to took it off and make sure your lights work!
City lights
http://i951.photobucket.com/albums/a...e/IMG_2288.jpg
Headlights
http://i951.photobucket.com/albums/a...e/IMG_2289.jpg
Turn signals
http://i951.photobucket.com/albums/a...e/IMG_2293.jpg
High beams
http://i951.photobucket.com/albums/a...e/IMG_2290.jpg
Now adjust your headlights so they dont blind people (I've yet to do that and found it out on the way home!)
Enjoy! I hope I covered everything.