Thanks in advance.
Printable View
Thanks in advance.
it's 4-20 and 4-26 in the helms.
You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20
It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
Sounds like a plan. Thanks guys! My belt looks like bacon! Lol
It's a lot easier than you'd expect.
J, if you need a copy of the helms let me know.
*A 14mm wrench and another larger wrench for leverage.
Finally, because they haven't been broken in yet, leather belts might seem a lot tighter when you first get them, but this will improve over time.
gyms to go