Loose clutch/Clutch fluid

Hey guys,

I got in my car to head to work a couple days ago, and when I pushed in my clutch to start my car, it was completely loose. It wouldn't grab at all, and I had to manually pull my clutch back up with my foot. I tried adding some DOT 3 fluid to the clutch fluid resivoir and pumped my clutch numerous times, but still no luck.

Any suggestions?

Bleed the clutch.

Thanks, I'll give that a shot when I can.

no problem Lmk if it works out.

It will be your clutch master cylinder OR Slave cylinder. Look for fluid around your Slave or it could just be your triangular plated master cylinder.

I replaced mine recently with a 00 civic EM2, works great!

Quote:

---

Originally Posted by Her-Name's-Ally

Bleed the clutch.

---

Quote:

---

Originally Posted by Dreadknotz1025

It will be your clutch master cylinder OR Slave cylinder. Look for fluid around your Slave or it could just be your triangular plated master cylinder.

I replaced mine recently with a 00 civic EM2, works great!

---

This. It sounds like there's probably a leak or air in your clutch line. You want an EM2 CMC (not 2000, you're looking for 2001-2005)