How to replace blinker relay switch
This is just a quick write up on how to replace a turn signal relay for most of you that have tried a failed to find it or never done one. I know it took me a while to find out where exactly it is and since i found no other thread about this, or atleast dont think anyone has made one yet, i figured i might as well start one my self.
TOOL :
The only tool youll need to do is your standard sized phillips head screwdriver. Their is only one screw to be removed.
Looking underneat the driver side dash and right above the gas pedal you could easily see the fuse box inside the car.
http://i4.photobucket.com/albums/y14...o/DSC_3314.jpg
At the bottom right corner youll see a small screw which youll need your standard phillips head screw driver to remove like so
http://i4.photobucket.com/albums/y14...o/DSC_3317.jpg
Once the screw is removed it should easily slide down so you can can easily reach the relay. Its got more than a couple on the their and the only one you need to remove is pretty much the biggest and only square one on the panel.
http://i4.photobucket.com/albums/y14...o/DSC_3320.jpg
http://i4.photobucket.com/albums/y14...o/DSC_3321.jpg
This one i took out is one i already replaced and bought from Auto Zone, Part #20119
Or you could pick one up at Honda, Part #38300-S5P-A01
Once your done replacing your old relay with the new one everything should go in as smoothly as it came out.
