Good info bro !!! man i did mine and danm it was a bitch. i wish i wouldve saw this thread.
Printable View
Good info bro !!! man i did mine and danm it was a bitch. i wish i wouldve saw this thread.
Do I need to do anything to regulate fuel pressure? Or just drop this in and thats it?
Thanks, great DIY. I take it that the wiring is pretty straight forward since you didn't mention it, Black to black and red to red?
the 3/8 hose number is H206
Im glad the made this cause I might replace my pump soon
very great write up
Is that new fuel line you add the important part? does it flow more than the stock lines or something?
Just did this DIY, great write up. With these instructions I did it start to finish in about an hour. The reason you need to cut off that piece and use the hose is because the new pump doesnt have the same fitting as the stock pump and it is alot longer so even if it did fit the quick release fitting they don't really line up. Thanks again for the write up
I used a big flat head screw driver and a hammer to tap the ring loose and then I could just loosen it by hand.