General Supercharger Questions

[PAsi]

Is it possible to have a CAI and Aftermarket headers and also the hondata heatshield gasket on a motor with a JR Supercharger? What can you do that you won't have to take off if you boost it?

[ssvr6]

You can run headers, I don't know about the CAI but I don't see why not. You may have to modify the piping a little, but not much. As for the gasket, I'm sure it won't work.


Steve

[CSMsi311]

Originally posted by ssvr6
You can run headers, I don't know about the CAI but I don't see why not. You may have to modify the piping a little, but not much. As for the gasket, I'm sure it won't work.


Steve

ssvr6 is right about everything. In my case with the jrsc the throttle body was moved down a few inches. This meant the CAI had to be modified a little to get it to fit right. As far as header goes, superchargers like larger, short primaries. http://theoldone.com/components/kamikazi/

Since the supercharger is attached to the intake manifold. the intake will get hot from the supercharger so I don't think the gasket will make much, if any, difference.