sorry to bring this back from the dead but fsugatorbait could you repost the pictures for me ? i would help me out a lot.
and does the s2000 start button light up ?
No thanks! :)Originally posted by blackout
push the clutch in,then push the button, then you'll hear some grinding.
sorry to bring this back from the dead but fsugatorbait could you repost the pictures for me ? i would help me out a lot.
and does the s2000 start button light up ?
I have OEM honda s2000 start button and It lights up.Originally posted by Ep3 No.2
does the s2000 start button light up ?
It's not bright though.
could someone repost the pictures to this ?
Originally posted by Ep3 No.2
could someone repost the pictures to this ?
Ill have the pics up in about 30 min, sorry it wasnt done earlier but ive been having problems all day with the server. :)
I searched around and looked at all of the installs and am a bit confused. I need some help in clarifying a few things. I bought the starter button from honda, so from what I understand I dont need a relay correct? If not then do what do I connect to the prongs and which ones do I use. I would appreciate a simplified step by step procedure on doing this from one of you who has the starter button from Honda.
so not i'm confused. do you need a relay? and in my 2004 ep3 there is no cig lighter so where should i get the power from?
You do NOT need a relay, but some people have used them. I've done the install on my car and 3 friends all 4 with out relays...
and for power, I think we all refer to the power outlet below the shifter console as the "cig lighter" even though none of the usdm civics have a real cig lighter... Thats where I got power and ground.... Hope that helps. :D
I have OEM Honda 2000 Start button and Didn't use relay.
Havn't had any problem for months.
http://www.aj-racing.com/JDM-DC5.html Why is the DC5r start button 210 dollars
hmmmmmm i had that problem twice
the time was due to the fact some psb (push start buttons) have adjustment parts. at least mines does. when i tighten the screw part in the back to much the starter grinds every time i pushed the cluth in. the second time is when i adjusted the throttle cable it grinded for a second in 3rd gear. after a lil adjustment it went away. check you switchs and your throttle cables
maybe the timing is to far advanced
It probably comes with the complete wiring harness and everything...Originally Posted by V B P 2004 E P3
I don't know if it's been mentioned before, but you can use a floppy disk power connector to plug into the S2000 start button. I used that and had no problems, no relay either, had mine in for more than a year... I put mine to the right of the steering column, in a blank spot, just had to cut out the plastic a little to make it flush. I also replaced the bulb with LEDs while I was in there, and wired the light to the same light that is on the key input, I think that is green, so when you start it up, it fades out slowly like the key light.
I dont understand, please explain... Do you have any picc of this install?Originally Posted by Ocelaris
Last edited by VBP2004EP3; 06-28-2004 at 10:35 AM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks