S2K engine start button/Hazard moved!

[fsugatorbait]

Originally posted by blackout
push the clutch in,then push the button, then you'll hear some grinding.

No thanks! :)

[Ep3 No.2]

sorry to bring this back from the dead but fsugatorbait could you repost the pictures for me ? i would help me out a lot.
and does the s2000 start button light up ?

[Civicvtec1ps]

Originally posted by Ep3 No.2
does the s2000 start button light up ?

I have OEM honda s2000 start button and It lights up.
It's not bright though.

[Ep3 No.2]

could someone repost the pictures to this ?

[fsugatorbait]

Originally posted by Ep3 No.2
could someone repost the pictures to this ?

Ill have the pics up in about 30 min, sorry it wasnt done earlier but ive been having problems all day with the server. :)

[registered]

I searched around and looked at all of the installs and am a bit confused. I need some help in clarifying a few things. I bought the starter button from honda, so from what I understand I dont need a relay correct? If not then do what do I connect to the prongs and which ones do I use. I would appreciate a simplified step by step procedure on doing this from one of you who has the starter button from Honda.

[Funkyjiffy]

so not i'm confused. do you need a relay? and in my 2004 ep3 there is no cig lighter so where should i get the power from?

[blackout]

You do NOT need a relay, but some people have used them. I've done the install on my car and 3 friends all 4 with out relays...

and for power, I think we all refer to the power outlet below the shifter console as the "cig lighter" even though none of the usdm civics have a real cig lighter... Thats where I got power and ground.... Hope that helps. :D

[Civicvtec1ps]

I have OEM Honda 2000 Start button and Didn't use relay.

Havn't had any problem for months.

[VBP2004EP3]

http://www.aj-racing.com/JDM-DC5.html Why is the DC5r start button 210 dollars

[VIZHUNZ02SI]

hmmmmmm i had that problem twice
the time was due to the fact some psb (push start buttons) have adjustment parts. at least mines does. when i tighten the screw part in the back to much the starter grinds every time i pushed the cluth in. the second time is when i adjusted the throttle cable it grinded for a second in 3rd gear. after a lil adjustment it went away. check you switchs and your throttle cables
maybe the timing is to far advanced

[blackout]

http://www.aj-racing.com/JDM-DC5.html Why is the DC5r start button 210 dollars

It probably comes with the complete wiring harness and everything...

[Ocelaris]

I don't know if it's been mentioned before, but you can use a floppy disk power connector to plug into the S2000 start button. I used that and had no problems, no relay either, had mine in for more than a year... I put mine to the right of the steering column, in a blank spot, just had to cut out the plastic a little to make it flush. I also replaced the bulb with LEDs while I was in there, and wired the light to the same light that is on the key input, I think that is green, so when you start it up, it fades out slowly like the key light.

[VBP2004EP3]

I don't know if it's been mentioned before, but you can use a floppy disk power connector to plug into the S2000 start button. I used that and had no problems, no relay either, had mine in for more than a year...

I dont understand, please explain... Do you have any picc of this install?

[VBP2004EP3]

Is this what you mean