remove cat

[SpeedRacer]

i want to remove my cat real bad but what am i supposed to do so my check engine light will not come on? Can someone help me? Is thare any fake sensors i can use anything will help thanks.

[2K2SilverSi]

there are sensor simulators you can buy. I dont know if they will work on an LEV though

[SpeedRacer]

whare do i buy them and how do i find out if they work do you know?

[ssvr6]

What are the sensors reading? Just air temps and such? Just hollow the cat out and keep your sensors plugged in. If that isn't the solution you're looking for, I know you can "fool" the sensors, I just don't know what part(s) you need.

Good luck,

Steve

[2K2SilverSi]

I dont know where to get them but they really arnt all that much. I know if you go to and domestic shop they should have them there due to the fact that so many mustang guys get H pipes and need to trick their OBD 2 computers. They might even be able to tell you if they work for an LEV car. That is the only thing I am wondering if they will simulate low enough levels of CO2. The sensors read temps CO2 levels and onther things such as that.

[00sir]

I posted about this a couple of weeks ago...

Do a search for "simulator" or "sensor"

Good luck,

Steve...

Oh yeah, hollowing out the cat would be bad...
You will definitely get a CEL if you do that.