Sway Bar sizes

[Suk02Si]

Stock:
Front: 25mm hollow
Rear: 15mm hollow

RSX:
Front: 23mm hollow
Rear: 19mm hollow

CTR/ITR:
Front: 22mm hollow
Rear: 22mm hollow

Progress:
Front: 27mm solid
Rear: 22mm solid

Hotchkis:
Front: 1"/ 25mm hollow
Rear: 1" / 25mm hollow

Mugen
Front: ?
Rear: 25mm

Neuspeed
Front: 27 mm solid
Rear: 22 mm solid

I'll update it when I get more info. I've emailed a few other companies to see if they had released anything yet.

[fsugatorbait]

Neuspeed
Front: 27 mm solid
Rear: 22 mm solid

[Civicvtec1ps]

Anti-Roll Bars (Sway Bars)
Thickness |Integrated Rear Tie|Part Number|
Comptech rear non-adjustable yes CT-140-115CLR
Comptech rear adjustable yes
Eibach Front 26mm 4051.32
Eibach Rear 16mm no 4051.32
Eibach Anti-Roll kit front(25mm)and rear(23mm) no 4054.3
Hotchkis Performance Front 25mm 22404
Hotchkis Performance Rear 25mm no 22404
Hotchkis Race Front 22405
Hotchkis Race Rear 22405
Neuspeed Front 27mm 15.20.27.6
Neuspeed Rear 22mm yes 25.20.22.1
Progress Front 27mm 61.0102
Progress Rear 22mm yes 62.0102
RSX/RSX-S Rear 19mm no
RSX-R/CTR 22mm no
Suspension Techniques(front and rear) Front=1". Rear15/16" no ST-52156

working on suspension part section currently for 7thgencivic.
almost there:)

[grey]

I have the Progress sway bars. I'm pretty sure that the front one is hollow. It's just a really thick guage. Am I wrong? When I pick it up it seems like it's hollow. As if it would weigh more if it was solid.

[97 TYPE-R 312]

double check on what is hollow and what is solid. I believe the fronts are hollow and the rears are solid. Mugen offers both 24 and 25 mm rear and 24.2 mm front as well. Also JDM front sway bars will not fit our USDM EP's as we have different front LCA's.

-Victor

[tony speed]

the mugen sway bars are solid