On the sides of the head unit, (make sure the domestic car adaptor sleeve is off) there should be several screw holes.
When you place the HU in the proper way, you should have two screw holes lined up on each side that match with the factory screw-holes.
Above the FRONT holes on the HU, there should be be another screw hole... These are the ones I used. This resulted in the head unit only being secured by 2 screws instead of 4, but it is still plenty solid. It also angles the rear of the unit up about 30 degrees, and makest the display much more readable in sunlight.
Screw here
. |
.__V_________________
|..O.................|
|..O.............O...|
|__^_________________|
. |
. |
Not here
Bookmarks