who makes the lowest springs.

[RacingCivicSi02]

What company makes the lowest drop. something around 2" to 3.5. something with still good handling in them. i check with H&R the lowest they have was around 1.75" for the front and the back was somewhat of 1.5". So im looking for something lower then H&R. Thx in advance

[2k2civicSi]

the ground control lowers it from 0-3in but if you drop it that much you know your gona have camber issues right

[xlr8]

Originally posted by RacingCivicSi02
What company makes the lowest drop. something around 2" to 3.5. something with still good handling in them. i check with H&R the lowest they have was around 1.75" for the front and the back was somewhat of 1.5". So im looking for something lower then H&R. Thx in advance

i hear sprint has a 2inch drop

[RacingCivicSi02]

Originally posted by xlr8

i hear sprint has a 2inch drop

Would u know anywhere i could buy these springs at? any websites? How much would these springs go for? How the does the springs handle while making sharp turns? And with a 2 in drop will i still have some camber issues? Thx u

[xlr8]

ask rocket_civic any of these questions. he has the srings on his car

[2k2civicSi]

i talked to him he has bad camber too you can just get a camber kit for 150 but its still gona wear your springs out very quick

[xlr8]

camber wont wear your springs. it will wear your tires. i have 1.8 degrees of negative camber in the rear and im not going to fix it. it handles better that way, and its not too excessive

[RacingCivicSi02]

So is a 2 inch drop gonna be good then

[xlr8]

Originally posted by RacingCivicSi02
So is a 2 inch drop gonna be good then

its all what you want. i love my h&r's wouldnt go any lower myself, but there is at least one person on this board thats dropped 3.5. i wanted performance not realy going for looks. 2 should be fine

[RacingCivicSi02]

ok Koo thx

[SUSHI_NE1]

Neuspeed Race Spings... I used to have these and they were at least a 2.5 - 3 inch drop. They drove very good to.

[ep3egg]

h&r limited edition lowering springs 3in drop front&rear

[Cheep3]

[PatrickJamesYu]

hahahaha

[socmex7]

What company makes the lowest drop. something around 2" to 3.5. something with still good handling in them.

nothing. any more than 1.5ish inches down and the suspension geometry is all out of wack. so unless you take the proper mods to correct that your car will handle like a large, understeering pig. sorry for the blunt response but that's what you get when im inebriated.