I need rear seat help.

[bmx269]

I removed my rear seats for weight while racing, now, I am going on a road trip and was reinstalling my seats and panels when I got stuck at the pivot between the two folding seats. I do not remember how the bolt / washer combo goes together and I need help. Can anyone help me ASAP. Maybe take a picture of the bolt for me with all the washers in place. Arrg I feel like a dumbass. :) Mugen_EP or Suk02Si come on guys, help me. :)

[ATRIOT]

Does this help? http://www.collegehillshonda.com/ins.../cdchanger.pdf
Good Luck.:)

[Mugen_EP]

Originally posted by bmx269
Mugen_EP or Suk02Si come on guys, help me. :)

Damn..I didnt see this till now. I feel bad.:( sorry Trent but hopefully the link that Atriot posted helped. If you still need a pic just lemme know.

Again, sorry. You should have called my cell...:'(

[bmx269]

Here is a diagram of the hinge i need info on. Thanks ATRIOT for the pdf that I used the image from.

[Mugen_EP]

I will be off work in 15 min and be home in 45 min. I will take pics for you then if someone has not already done it.

[Mugen_EP]

OK it looks like this: Bolt][ rubber gromet][bracket][rubber gromet.

Here are the pics...hth.