Hooooo-Weee! JDM rear sway just in....

[RockEP_SS**]

Yo! Anyone out there with a JDM CTR rear sway bar?? How much of a difference was it? Just got mine in and I should be installing mine manana cause I got plans today (Buy Matrix Reloaded, watch it, and sleep!). Any pointers or tips on the install would be great. Thanks!


Rocky :D
Showstoppers USA

[Peking]

Sweet. And I wanted to say thanks, my springs came in along with the camber kit.

[02SilverSiHB]

I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.

[RockEP_SS**]

Originally posted by Atlas1133
Sweet. And I wanted to say thanks, my springs came in along with the camber kit.

No problem!

[RockEP_SS**]

Originally posted by 02SilverSiHB
I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.

Nice! Thanks for the pointers!

Rocky
Showstoppers USA

[HeelToePro]

Don't install it upside down.

[raiyo]

Here's my tip on installing it

click me

[RockEP_SS**]

Originally posted by raiyo
Here's my tip on installing it

click me

Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.

Rocky
Showstoppers USA

[raiyo]

Originally posted by RockEP_SS**
Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.

Rocky
Showstoppers USA

the bar went straight in "the wrong way" without any diffculty. later found out it was wrong.