install of NX nitrous kit???

[LazyAzzAzian]

does anyone know where to find a detailed install of a NX nitrous kit on a k-series?

[BlackSi2002]

I don't know where a step by step install is, but i installed my whole kit by myself, and it works, so if you need help, i'm sure there are people on here that will help you and i will be more then happy to help you if you just want to post when you have questions.

[sniperSI]

stick the bottle in your gas tank and spin the nob. then start the car.

[BlackSi2002]

stick the bottle in your gas tank and spin the nob. then start the car.

Been there, Done that, the bottle won't fit i tryed......haha your funny

[smokincivic]

Originally posted by BlackSi2002
Been there, Done that, the bottle won't fit i tryed......haha your funny

no see you have it all wrong just take the braided nitrous line and electrical tape it to the opening of the throttle body bring the car up to 5k and open the bottle you should feel about a 1 sec burst of power followed by the manifold exploding and TB actually separting, and yes we did try this on my friends samuri beater.

[LazyAzzAzian]

wow you guys are great...BlackSi2002 thanks for actually trying to help...:D

[LazyAzzAzian]

hey BlackSi2002, would you happen to have pics of how you installed your WOT switch and also where you tapped into your fuel line, thanks!

[BlackSi2002]

no problem, it gives me a reason to use my digital cam. as you can see in the pic i mounted the WOT switch, in the car, so when the gas petal is all the way down it pushes the switch, it takes some time and bending, but it works great there.

[BlackSi2002]

2

[BlackSi2002]

btw that view of the WOT is if you look up from the gas petal, here is the one of the fuel tap

[K-Series]

Is there no where to mount the micro swicth under the hood?

[Silverstreak]

I think you can install it by the TB so when you are WOT it will be depressed. BTW it looks like you tightened the shit out of the hose clamps on the fuel tap.

[BAYSICSI03]

WHERE DO I HOOK UP MY VACUM AT

[RSX_Factor]

I realize I'm coming into this post probably long after you need any help but I have a NX setup on my RSX.

I like the way you set-up your WOT switch BlackSi2002. I had a shop install mine and they put it on the floor so when I mash the pedal all the way down it hits the switch. Works the same way your's does but your's is in a better spot, I think.

[NamingException]

You can download install documentation from NX, too, if I remember right.