thats pretty dumb !! theres no flipping that mount over ?
I hate stupid little crap like this! They sent the bar, but the bracket to the passenger side is wrong, so it won't install. It hits the frame coming down in front of where the passenger side one would go. Basically I received a bar with two driver side brackets
Pic:
http://www.imagestation.com/mypictur...&id=4249386933
thats pretty dumb !! theres no flipping that mount over ?
Oh crap, me too!Originally posted by sicivic2002
Now I'm nervous.
Don't be nervous.
Its a simple litlle mistake DONE BY DUMBSHITS WHO NEVER MADE IT PAST THE THIRD GRADE, AND NOW THEY ARE SELLING AUTO PARTS LIKE DEALERS TO A CRACK FEIND.
nope, and they want me to send it back to them, well just the brackets, so I have to pay to send something back that I didn't screw up!Originally posted by OrganDonar 8=D
thats pretty dumb !! theres no flipping that mount over ?
But then again, I'll never forget when I bought the same type of bar for my previous civic. They sent me two, and I sold the other one. What goes around comes around
BAHHH! you get what you pay for, sucks man good luck and hopefully they will pay you to ship them back to them ! -joe
cut sand and reweld....... at an exhaust shop thats if you don't have a mig welder yourself.......... take about 1 min to do. if the flanger is like this
-(
cut it and reweld to look the opposite of the other side like this
_(
? ummmm....no, I don't think your on the same track. it's just a bracket that is easy to remove from the strut. I'm sending both back so they can know which ones to send.Originally posted by sammysir
cut sand and reweld....... at an exhaust shop thats if you don't have a mig welder yourself.......... take about 1 min to do. if the flanger is like this
-(
cut it and reweld to look the opposite of the other side like this
_(
no i know exactly what you saying u have to adapt the passenger side one. so you cut the u flip it turn a 1/4 turn a re weld i have done this to fit braces on some cars that don't have specific apps for them err's a pic of what im saying to do.
:D okay, got ya, you were confusing me, then again, I'm working on my calculus right now, go figure. I think it's more trouble than it's worth, plus I'd have to pay more probably, and I don't know of a shop around here that will have enough time to do it, with my busy scheduleOriginally posted by sammysir
no i know exactly what you saying u have to adapt the passenger side one. so you cut the u flip it turn a 1/4 turn a re weld i have done this to fit braces on some cars that don't have specific apps for them err's a pic of what im saying to do.
thanks though
its a nice looking bar. when im able ill post pics of my mugen bar, its pretty light looking (although i paid enough for it!) sorry about the trouble with the install though, wish i could help, but i dont know about the ep too well.
ah, nothing to do with the car, they just sent me two brackets for the driver side, instead of one for the driver side and another for the passenger side. I'll be sending the brackets back today.Originally posted by whitehotEX
its a nice looking bar. when im able ill post pics of my mugen bar, its pretty light looking (although i paid enough for it!) sorry about the trouble with the install though, wish i could help, but i dont know about the ep too well.
hope you get everything soon man and don't forget the pics. :D
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks