Quite a few people have them. But, everyone that I've seen with them has one or more filled with water or fogged on the inside. If you can live with that, I don't think they would be hard to install.
does anyone have tose clear sidemarkers sold on ebay? How do they look? Do you like them? Are they easy to install?
Quite a few people have them. But, everyone that I've seen with them has one or more filled with water or fogged on the inside. If you can live with that, I don't think they would be hard to install.
Imo they look abit cheap. I took out the factory ones and painted them black to match the body, the light still blink threw the dark paint but I think it looks alot cleaner.
yes easy to install. read the fucking manual .(in good way )
:D
Mine dont seem to be budging.... I was able to get the fender side markers off, but i cant get the bumper side markers to move... Any suggestions? Im afraid im gunna break em...
are you pulling from the outside or pushing on the clip from the inside? I'm pretty sure the only way to do it with out braking anything is to go in from the inside of the bumper.
your suppose to take it off from the inside of the bumper. There should be a tab for the corners. juss push it. it comes off. don't pull it completely off till u get the bulbs and the wires off.
they break easily.. becarful when removing.. ebay ones look cheap and arnt worth the 35 bux.IMO
hey does anyone have their original orange bumpermarkers NOT BROKEN?? i broke my first ones but i wanna put back the orange...
Formerly known as Plainol2k2si
I swapped with clear side bumper lights many many times. Stock orange ons are in perfect shape. (im not selling btw). Just go to "wanted" section. or just buy from dealer. Only cost arond $20.Originally posted by plainol2k2si
hey does anyone have their original orange bumpermarkers NOT BROKEN?? i broke my first ones but i wanna put back the orange...
lol...itll probaby be cheaper from someone that doesnt "need" it
Formerly known as Plainol2k2si
yeah, after about 3 months, mine did that. I swap my stock ones back on in the rear, but put the good ones up front and so far no water/fog on the front ones nowOriginally posted by AkronSi
Quite a few people have them. But, everyone that I've seen with them has one or more filled with water or fogged on the inside. If you can live with that, I don't think they would be hard to install.
I agree the clear ones look cheap but the stock ones shouldn't break if you take them out properly from the inside.Originally posted by civicSIracer
they break easily.. becarful when removing.. ebay ones look cheap and arnt worth the 35 bux.IMO
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks