e brake adjustment

[denmah]

Originally posted by MrCivic03
how do u pop the plastic off of it to reveal that stuff?? thanks guys i might do this and try out before i put new wheels on... heheh

\

for those of you that didnt read the instructions on the top of the page the first time
there are screws in front of the seat near the carpet, and screws near the rear cupholder 2 in the front of the seat and 2 in the rear near the cupholder.. remove those screws with a phillips head screwdriver (you know the + one) then grab the rear cupholder and pull up and the whole thing will pop out. get it off the shifter and out from in between the seats and tighten the one and only adjustable bolt on the screw... there for making the ebrake pull harder than it was... by effectively tightening the cable...

you could always have the dealer do it.

[digitldlnkwnt]

great thread...i vote to make it a sticky

[rs_1101]

lol.

i rock.

[03SiBlack]

how many turns did you guys give it to tighten?

[denmah]

you can feel the calipers grab in the arm when you pull it, i gave it a few turns, im going to take it apart again and give it many more turns

my best advice is to turn it a few times 10 or so and go for a drive and rip on it.

if you like it cap it and be done

[CrazyLowEp3]

Originally posted by rs_1101
lol.

i rock.

YEA 2nd and 3rd Gear Burnouts hott my vote 4 a Sticky !!:D