Great job! Looks great. I just did the same mod a month or so ago....:D
I used Dupli-Color AutoMotive paint. The color is Graphite Grey. IT looks gunmetal.
Bumper taken off
Picture of the Engine bay. I know it dirty.
Injen Intake
We mask the Housing. And spray paint it.
Results
I will try and get the picture of the car with the headlights on. When sunny. It kinda dark rite now.
Great job! Looks great. I just did the same mod a month or so ago....:D
Mel
Looks good man. I will do that eventually or just buy CTR headlights. Too cold outside.:'(
Did you use a blowdryer to heat the silicon????
Also what silicon did you use to reseal and where did you get it? Thanks, Josh
Bake them bad boys in the oven...much easier.Originally posted by my02si
Did you use a blowdryer to heat the silicon????
Also what silicon did you use to reseal and where did you get it? Thanks, Josh
Check out DTH's DIY: http://www.ephatch.com/forum/showthr...threadid=21419
It's a great how-to...:D
Mel
I have done it once I need to redo it. I baked them as well but wasnt sure if there was na easier way.
To get the covers off. Heat up the oven to around 350 degree. leave it on for about 10 mins. Then turn it off and throw the headlights in there. Leave it in there for about 15 mins and take them off and pry it open.
The type of silcone is made by Permatex. It called Clear RTV Silicone adhesive Sealant. I got the transparent one. Item # is 80855. you will need the Caulk gun for it.
I only use the Blow dryer to help dry up the paint on the housing.
and I got my silicone from home depot.
Woah, that looks awesome man! Nice job! I still need to do this mod... so scared tho!
niiice. Did you notice any difference in the way that the lights work? (are they not as bright or other projection problems?)?
Actually they look the same on the road. Because i left the main headlight part alone. But i also added Silverstar while i had the headlights off.Originally posted by sintax02si
niiice. Did you notice any difference in the way that the lights work? (are they not as bright or other projection problems?)?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks