Hey...im new here and i was just wondering if anyone knew how to take off and paint the stock k20a3 valve cover and paint it wrinkle red to make it look like the k20a1. any help here would be appreciated.
yeah I would like to know this as well.
Can someone post a detailed description on how to take off and put back on a valve cover. Is there anything we should know or be careful of before hand before I attempt such a thing. Some people's idea of simple can actually be quite difficult for some people
hey sidriverep3, welcome to the site. there was a couple of posts on this under the customs forum.
here is one of the threads
http://ephatch.com/forum/showthread.php?threadid=19318
Yeah I read that before too. There isn't any information on the actual removal or install of the valve cover though
These 2 pics should answer it for you. It's dead easy. I got a new valve cover gasket assy for mine when I swapped the head.Originally posted by SiR_d1
Yeah I read that before too. There isn't any information on the actual removal or install of the valve cover though
Pic 1 of 2
Pic 2. hth:D
much respect:D
was this from a shop manual?
Yes SiR, nothing but. Never hurts to spread a little sunshine. I recommend anyone who wants to learn about his or her ride to get one from Helm ;)was this from a shop manual?
Edit: If you are want to kill 2 birds, one stone and are looking to compare things with the A2 setup for your A3... get the RSX manual, it pretty well covers both the A2 and A3. I got both.
Last edited by myeverlovinsir; 12-25-2003 at 05:37 PM.
for the coil removal/install the Helm manual says its in page 4-18, is there anything useful or important to know in those pages regarding this matter?
Dude, that's the second pic!;)Originally posted by SiR_d1
for the coil removal/install the Helm manual says its in page 4-18, is there anything useful or important to know in those pages regarding this matter?
Edit: Are you trying to get my post count up or something?
Last edited by myeverlovinsir; 12-25-2003 at 05:58 PM.
but it said pages 4-18 and thats only a pic of one page?Originally posted by myeverlovinsir
Dude, that's the second pic!;)
Edit: Are you trying to get my post count up or something?
Don't make me come over there a smack ya! I posted 2 pics, hello!Originally posted by SiR_d1
but it said pages 4-18 and thats only a pic of one page?
2nd is the ref. page 4-18 (removal of the coils) ho ho ho!
You must think that it means pages 4 through 18. WRONG. only pg. 4 dash 18. Believe me, it's all there! I have taken apart my head 4 times over the last week! Have fun;)
Click here and believe!
Last edited by myeverlovinsir; 12-25-2003 at 06:33 PM.
my bad!
you da man
in second pic of that shop manual how do you remove that nut thats threaded down that bolt and using what tool? I attempted to remove mine yesterday but I didn't know who to remove it with my rachet.Originally posted by myeverlovinsir
Pic 2. hth:D
In the pic of the removal of the removal of the coils there are 4 bolts to remove, starting from the left thats bolt 1, 2, 3, 4. I want to know how you get out bolt 2 and 4
These 2 are integrated with the ignition coil cover, once unscrewed simply lift them out with the cover.I want to know how you get out bolt 2 and 4
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks