I'll paypal you $1 for your 2 minutes of work :D

[CIVIC dude]

I was wondering if anyone has removed the stock steering wheel or can take a few seconds to remove the cruise control switch

If anyone is willing to check for me that would be awesome! all you have to do is remove the two screws from the cruise control switch that is mounted to the steering wheel.

Here is the cruise wire i have, i now need a switch for it to mount to the steering wheel!

Thanks in advance




And yes, im serious i will paypal you a dollar if you can take the time to help me out !

[Speck]

Be glad to help out if I can... but...



-=speck=-

[CIVIC dude]

ok basically this what i need someones help with:

i need someone with an SI to take off their cruise control switch that is screwed onto the steering wheel. It is held on with two bolts.

Once the switch is off, i need to know what the connector looks like. And know how many holes it has. A picture would be best

Reason being is that i have a JDM DC5 RSX wheel on my 00si.

The steering wheel has no slot for cruise control switch. What i have done so far is i purchased the cover with the hole from honda.

Now i need to know if the 02+ switch has the same connector as the 00 cruise wire that i have posted above.

It seems second nature to me but i realize my original post can be somewhat confusing.

[Mugen_EP]

gimme a sec and I will have a pic for you....it will be easy for me since I have the dc5 steering wheel so its not connected. I'll post the pick in about 5 min max

[CIVIC dude]

Thank you!

i believe we spoke through PM when i had a usdm si wheel that i ended up selling for the JDM one!

[Mugen_EP]

having uploading problems.

[CIVIC dude]

Cant see the pic,

email me please: frank21@rogers.com

let me know you paypal account

thanks

[Mugen_EP]

email sent

[CIVIC dude]

response sent!

[Mugen_EP]

you get it???

[CIVIC dude]

I got one pic,

i responded to you asking if you could get me a pic of the back of the switch off of the steering wheel?

thanks again

[Mugen_EP]

I would need to take off the steering wheel to see that plug. I dont have a torx wrench available so I wont be able to get to that tonight. I can try and get pics for you tomorrow.

[CIVIC dude]

I thought you had the DC5 steering wheel ?

did u somehow get the crusie switches on your DC5 wheel?

you dont have to remove the whole steering wheel,

simply unbolt the switch from the steering wheel.

[CIVIC dude]

this is the wheel,



i want to add the cruise buttons onto it. Since its an EK i want to know if the EP's switch that mounts to the wheel will connect to my cruise wire that came factory on my EK.

The pic i posted above is the wire from my car, i now need to know if the EP switch will work with that connector

thanks

[Mugen_EP]

Originally posted by CIVIC dude
I thought you had the DC5 steering wheel ?

did u somehow get the crusie switches on your DC5 wheel?

you dont have to remove the whole steering wheel,

simply unbolt the switch from the steering wheel.

I have the DC5 steering wheel which doesnt have the cruise control module. There is no plate I can unscrew or unclip. The only clips on the wheel are the two to get to the two torx bolts.