es rear sway bushings

[styllinep3]

who ever hasnt gotten these, get them! i put them on my ctr 22 mm rear sway. omg it made a bigger diffrence then the sway its self. i have the front stock sway, and neuspeed front sway bushings. with that, my strut bars, and tiens the car is perfect, so netrual. freakin awsome, no more over/under steer its just right. rotates so easliy and levels out of turns so nice. 14.99$ for the set at pep boys, and a easy install. really makes a bigger sway effective.:D

[RiCeCoOkEr1280]

I couldn't agree with you more. Upon installation of my front/rear progress sways, I noticed the links were bent. I went to Autozone and saw ES sway bushings. I picked up a set for both front & rear (different sizes) and they did make a difference. Good mod for $18.39 out the door.

Paul

[styllinep3]

yes it is . it made my rear sway at least twice as effective. i wasnt liking the ctr bar that much till these bushings. now im loving it :D ;)

[trk]

Originally posted by RiCeCoOkEr1280
I couldn't agree with you more. Upon installation of my front/rear progress sways, I noticed the links were bent. I went to Autozone and saw ES sway bushings. I picked up a set for both front & rear (different sizes) and they did make a difference. Good mod for $18.39 out the door.

Paul

Which bushing(s) does it replace on the progress bars?

Tai

[RiCeCoOkEr1280]

Originally posted by trk
Which bushing(s) does it replace on the progress bars?

Tai

The ones that go in between the d-link and the Progress tie bar.

Paul

[trk]

Originally posted by RiCeCoOkEr1280
The ones that go in between the d-link and the Progress tie bar.

Paul

So the 2 that come with the progress bar? -- Are the ES ones that much better?

[RiCeCoOkEr1280]

I personally like them. I'm sure those w/ these installed agree.

Paul

[oogy-boogy]

Nice....

Thanks for the tips Gabe. Next cheapo mod for me!!!!!!!:D

[styllinep3]

yea man they will fit any 22 mm bar. just look on the back of the package. theres a code for each bar size. they even come with new adjustable barckets with grease fittings on them to grease easily.

sure thing mel

did i make atco on sun i didnt:'(

[oogy-boogy]

Originally posted by styllinep3
yea man they will fit any 22 mm bar. just look on the back of the package. theres a code for each bar size. they even come with new adjustable barckets with grease fittings on them to grease easily.

sure thing mel

did i make atco on sun i didnt:'(

Nah, I didn't make it.....:(