Greddy Dyno #'s

[vtecnrg]

Dyno numbers for the Greddy turbo today. SAE Horsepower & Torque.
HP - 231.3 Torque - 201.2 BTW, no intercooler, all stock emanage settings. Invidia exhaust.

http://photos.imageevent.com/markand...e/P2220104.jpg

http://photos.imageevent.com/markand...e/P2210084.jpg

[rook]

These figures came off a dynojet dyno at 5400 ft elevation. I ran my car a little after vtecnrg and posted 140.5 hp and 126.5 tq. I saw the run, very very impressed by his numbers.

7 ep's dyno'd back to back today. Very fun/interesting meet. Also got to see a 300zxTT put down 550 hp.

rook

[CSMsi311]

nice numbers.. do you plan on running the intercooler?

also, what size are your fuel injectors? what is your fuel pressure?

[vtecnrg]

Originally posted by CSMsi311
nice numbers.. do you plan on running the intercooler?

also, what size are your fuel injectors? what is your fuel pressure?

Thanks, I should have the intercooler before summer. Greddy fuel injectors for the Si kit are 440cc. Turbo is the T517Z. Fuel pressure stock.

[blackout]

I ran mine right after the turbo, mines completly stock (134.5hp). I'm sold on the greddy.

VERY impresive numbers today Mark.

[seattlecivic]

badasssss

[03EP3Si]

how much were you boosting??

[Vertigo]

Those are damn good numbers. Plus not having a IC and a tweaked e-manage is even more impresive.

[vtecnrg]

Originally posted by 03EP3Si
how much were you boosting??

The factory settings from Greddy have been left as is, it is hard to tell exactly on the boost gauge, 6.5-7lbs? I am hoping the intercooler pushes it up over 250 wheel hp. It amazes me that this kit is designed to run efficiently at 27psi. It is currently my daily driver about 65 miles round trip.

[2k2SiAutoXer]

i just cant get over the numbers that we are all seeing from these turbo kits. I have not been into imports for too long but it seems that this motor responds better than most to turbo apps. Anyways, back on topic. I get my turbo slapped on really soon, and i cant wait to compare it to vtcrng's.

--Tom

[PAPITUYO326]

every time i go to the dyno section i find myself lookin at this thread....

those are serious numbers to be pushin out...specially w/out an intercooler

david

[vtecnrg]

Originally posted by PAPITUYO326
every time i go to the dyno section i find myself lookin at this thread....

those are serious numbers to be pushin out...specially w/out an intercooler

david

I think about them everyday when I am driving it. I came across a ZO6 yesterday and while I was not faster you should have seen the look on the guys face. You could see those wheels turning upstairs and I would swear I saw a little smoke coming from his ears as he was trying to figure out why a little Civic Si could hang so well.

[blackout]

Hell yeah, thats awesome about the Z06... I can't wait for another ride.:D

[D16Y8_Turbo]

Originally posted by 2k2SiAutoXer
I get my turbo slapped on really soon, and i cant wait to compare it to vtcrng's.

--Tom

When are you installing your Greddy Kit? Looks like I will have to go to the dyno for a few pulls with the reflash and IC. :)

[SiGuy]

Wow! Great numbers! Was that the Greddy kit that goes for about 2500 bucks? How bad was the install? I've been trying to decide between a jrsc, A2 swap, or a k24a2 swap. But if that Greddy is putting down 230 for abut 2500 bucks, I'm sold.