just sound like your line isn't conected right. have you tried using lock tight? i know i had a nitrous leak but mine was at the fogger but get it checked out
Alright, Ive got a prob. Does anyone know at what psi the bottle is when filled with nitrous. Im having a prob, the line i have ran from the bottle keep "blowing" off the fitting to the purge. I think the fitting in the purge valve is striped. when i turn the bottle on i can hear a small leak in the line then it will blow off the end. Im going to run down to my local hardware store and get a new fitting which i think is the problem. I just want some info on this quick if possible. Or if you have heard or seen this happen b4...I dunno if i made myself clear but i am writing this really quick to get some answers!!
Thanks for the info,
K20hatch
just sound like your line isn't conected right. have you tried using lock tight? i know i had a nitrous leak but mine was at the fogger but get it checked out
Thanks for the info guys....went to the hardware store 3 or 4 times today and everything works fine and great...!
thats good to hear good luck
did you liquid teflon it?Originally posted by k20hatch
Thanks for the info guys....went to the hardware store 3 or 4 times today and everything works fine and great...!
Keep in mind the lines for nx + nos (at least as far as i know). are not designed to sustain pressure. They are made to slowly leak. I gave NX a ton of hell about it yesterday, but thats the way they're made. So if your bottle is open, you're leaking nitrous. :(
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks