progress rear sway results

[k20ASi]

I installed progress rear sway bar on friday and this mod is awsome. It takes so much body roll out of the back. I have nuespeed race springs and it did make the ride a little more bouncy but its not so bad after i have driven with it on four a few days now. I have a skunk 2 cat back and they rest on each other. It only rattals every once in awail. Im going to put somthing between them so the dont make metal to metal contact.Also with the exuast resting on the sway bar you can feel the exuast viberating the car.
Pics soon!

[k20ASi]

ok today i fliped the bar the other way becouse i had a feeling i installed it wrong, I did it now rides smooth as it did before and and ther is plenty of clearance for the exuast now.

[RockEP_SS**]

The rear sway is great, and I quadruple checked to make sure it was installed properly too. Kinda tricky!

Rocky
Showstoppers USA

[k20ASi]

o yea i did purchase the bar from showstoppers and i will be ordering many more parts from you guys in the future. Great cutomer service keeps me comming back.

[johnkimble]

do u know the torque settings for the rear bolts? or did you just elbow grease those biches tight? lemme know!

[k20ASi]

The to Large bolts need to be Tq to 48 ft/lb

[RockEP_SS**]

I just hand tightened mine, and double checked a week later that it was still tight. I heard of one members tie bar fallin off!

Rocky
Showstoppers USA

[johnkimble]

cool, thanks. the manual is pretty brief on the torque settings and just want to get it straight and do it right the first time. thanks again.

[k20ASi]

yea if you need any more specs about the install let me know I got the 02 si manual from honda. how is your ride with the sway bar now?

[johnkimble]

i haven't installed it yet... was waiting for my mugens to go in first :)

[johnkimble]

sorry to completely whore this thread out but since k20si's box is full i'm just going to post here :D

but thanks for the ft-lbs on the rear lca bolts... i need to know the amount of torque needed for the subframe/sway bracket bolts (4) ... for now i just did them to 16, hope that's good enough ... let me know asap please if you can and it s not too much trouble ;)

thanks!